Official Series Description


Lab Data Summary

Aggregate lab data for the RION soil series. This aggregation is based on all pedons with a current taxon name of RION, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to RION were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Click the image to view it full size.

Pedons used in the lab summary:

MLRALab IDPedon IDTaxonnameCINSSL / NASIS ReportsLink To SoilWeb GMap
13688P047788NC157001Rion6Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties36.378334,-79.6905594

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the RION soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the RION series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the RION series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the RION series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D mountains figure.

Click the image to view it full size.

Click the image to view it full size.

Competing Series

Soil series competing with RION share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the RION series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the RION series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with RION, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

Click a link below to display the diagram. Note that these diagrams may be from multiple survey areas.

  1. NC-2010-09-27-04 | Burke County - 2006

    Typical relationship between soils, landform, and parent material in the Cecil-Pacolet general soil map unit in the Piedmont (Soil Survey of Burke County, North Carolina; 2006).

  2. NC-2010-09-28-02 | Cleveland County - 2006

    The relationship between soils, landform, and parent material in the Pacolet-Bethlehem general soil map unit. The very deep Pacolet soils are in concave landform positions. They formed in residuum derived from schist or gneiss bedrock. The moderately deep Bethlehem soils are in convex landform positions. They formed in residuum derived from schist bedrock (Soil Survey of Cleveland County, North Carolina; 2006).

  3. NC-2010-09-28-05 | Rutherford County - 1997

    Typical relationship of soils, landform position, and parent material in the Madison-Pacolet-Grover general soil map unit (Soil Survey of Rutherford County, North Carolina; 1997).

  4. NC-2012-02-07-29 | Lincoln County - January 1995

    Relationship of soils and parent material in the Pacolet-Madison-Rion general soil map unit (Soil Survey of Lincoln County, North Carolina; January 1995).

  5. NC-2012-02-07-38 | Polk County - 1998

    The relationship between soils, landscape, and parent material in the Pacolet-Madison-Rion general soil map unit. The clayey Pacolet, Madison, and Cecil soils occur on ridgetops. The loamy Rion, Grover, and Ashlar soils are on the adjacent side slopes (Soil Survey of Polk County, North Carolina; 1998).

  6. NC-2012-02-07-39 | Polk County - 1998

    The relationship between soils, landscape, and parent material in the Riverview-Chewacla-Buncombe general soil map unit. The Buncombe soils are in convex areas adjacent to the stream channel; the Chewacla soils are in the lower, concave areas further from the channel; and the Riverview soils occur in the remaining areas of the flood plain. The clayey Masada, Dogue, and Roanoke soils are on the higher stream terraces (Soil Survey of Polk County, North Carolina; 1998).

Map Units

Map units containing RION as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Pacolet-Rion complex, 6 to 15 percent slopes, moderately eroded, stonyPrD22779018957332twx3al03720061:24000
Pacolet-Rion complex, 15 to 25 percent slopes, moderately eroded, stonyPrE21664718957342twx2al03720061:24000
Louisburg-Rion-Rock outcrop complex, 15 to 35 percent slopes, very boulderyLrE15274189572721mnhal03720061:24000
Louisburg-Rion-Rock outcrop complex, 6 to 15 percent slopes, very boulderyLrD5925189572621mngal03720061:24000
Pacolet-Rion complex, 6 to 15 percent slopes, moderately eroded, stonyPrD26412714764402twx3al12320051:24000
Pacolet-Rion complex, 15 to 25 percent slopes, moderately eroded, stonyPrE22645914764392twx2al12320051:24000
Louisburg-Rion-Rock outcrop complex, 15 to 35 percent slopes, very boulderyLrE273014764251lkbmal12320051:24000
Louisburg-Rion-Rock outcrop complex, 6 to 15 percent slopes, very boulderyLrD229014764261lkbnal12320051:24000
Rion sandy loam, 10 to 15 percent slopesRnD80624217132m8zsga01520131:12000
Rion sandy loam, 15 to 25 percent slopesRnE54624217522tfg2ga01520131:12000
Rion sandy loam, 6 to 10 percent slopesRnC10524217122m8zrga01520131:12000
Wateree-Rion complex, 10 to 25 percent slopesLnE35281242062xpwsga06719691:15840
Ashlar-Rion complex, 25 to 55 percent slopesLeF8451243632xpwvga11719571:20000
Ashlar-Rion complex, 15 to 25 percent slopesLeE5351243622xpwyga11719571:20000
Ashlar-Rion complex, 2 to 15 percent slopesLeC25001243612xpwwga11719571:20000
Rion sandy loam, 10 to 15 percent slopesReD4221516723522tffrga12120071:12000
Urban land-Rion complex, 10 to 25 percent slopesUrE2132016724211t492ga12120071:12000
Rion sandy loam, 15 to 25 percent slopesReE1008516540212tfg2ga12120071:12000
Rion-Louisburg complex, 10 to 20 percent slopes, boulderyRoE945516723501t46sga12120071:12000
Rion-Louisburg complex, 20 to 35 percent slopes, boulderyRoF432016723511t46tga12120071:12000
Ashlar-Rion complex, 6 to 25 percent slopes, stonyArE242016723541t46xga12120071:12000
Urban land-Ashlar-Rion complex, 10 to 25 percent slopes, stonyUeE172016540411sj55ga12120071:12000
Urban land-Rion-Louisburg complex, 10 to 25 percent slopes, boulderyUsE98016724201t491ga12120071:12000
Ashlar, Rion, and Wateree soils, 10 to 25 percent slopesARE10960640009pgzgga13519661:15840
Rawlings and Rion soils, 2 to 10 percent slopesRAC6710640007pgzdga13519661:15840
Rion and Bethlehem soils, 15 to 45 percent slopes, stonyRNF2470640004pgz9ga13519661:15840
Rion sandy loam, 15 to 40 percent slopesReF6701269764840ga15919971:24000
Rion sandy loam, 10 to 15 percent slopesRnD1163525112172tffrga22320101:12000
Rion sandy loam, 6 to 10 percent slopesRnC734025112161tjs7ga22320101:12000
Rion sandy loam, 15 to 25 percent slopesRnE727525112182tfg2ga22320101:12000
Wateree-Rion complex, 15 to 25 percent slopesWnE42052511224218cyga22320101:12000
Wateree-Rion complex, 10 to 15 percent slopesWnD20052511223218cxga22320101:12000
Wateree-Rion complex, 6 to 10 percent slopesWnC15552511222218ctga22320101:12000
Wateree-Rion complex, 15 to 25 percent slopes, boulderyWeE80025112131tjqzga22320101:12000
Wateree-Rion complex, 6 to 15 percent slopes, boulderyWeD49025112141tjr0ga22320101:12000
Rion-Wateree complex, 10 to 25 percent slopesLuE118451253192xn6jga60619731:20000
Wateree-Rion-Rock outcrop complex, 2 to 15 percent slopesWaD343526390932rj4nga63920121:24000
Rion-Ashlar-Wake complex, 10 to 25 percent slopesRaE5780127117488kga64519951:12000
Rion-Wateree-Wake complex, 2 to 10 percent slopesReC2350127118488lga64519951:12000
Rion sandy loam, 15 to 35 percent slopesReE80012738048k1ga64919921:12000
Rion sandy loam, 6 to 15 percent slopesReD25012737948k0ga64919921:12000
Rion-Cliffside complex, 25 to 60 percent slopes, very stonyRsE981170213xrwnc02320001:24000
Rion-Cliffside complex, 25 to 60 percent slopes, very stonyRnE16321170933xv6nc04520001:24000
Rion-Ashlar complex, 25 to 60 percent slopes, rockyRaE8171170923xv5nc04520001:24000
Rion sandy loam, 15 to 45 percent slopesRnD164824401252mx4qnc05919881:24000
Rion sandy loam, 8 to 15 percent slopesRnC26524401242mx4pnc05919881:24000
Wateree-Rion-Wedowee complex, 15 to 25 percent slopesWcE27324335692mpb7nc06719701:15840
Wateree-Rion complex, 15 to 45 percent slopesWaF9924335622mpb0nc06719701:15840
Wateree-Rion complex, 6 to 15 percent slopesWaD2924335652mpb3nc06719701:15840
Ashlar-Rion complex, 15 to 45 percent slopesAsF2724340022mps6nc06719701:15840
Wateree-Rion-Wedowee complex, 15 to 30 percent slopesWdE1341126253s62nc06919971:24000
Rion-Wateree-Wedowee complex, 8 to 15 percent slopesReD801126053s5fnc06919971:24000
Wateree-Rion-Wedowee complex, 15 to 30 percent slopesWaE8211127893sccnc07719931:24000
Rion-Wateree-Wedowee complex, 8 to 15 percent slopesRwD7671127823sc4nc07719931:24000
Rion sandy loam, 15 to 45 percent slopesRiF239124243682mcrfnc09720111:12000
Rion sandy loam, 8 to 15 percent slopesRiD17524243672mcrdnc09720111:12000
Rion sandy loam, 15 to 40 percent slopesRnF35761135543t51nc10119861:24000
Rion sandy loam, 2 to 8 percent slopesRnB11941136443t7ync10919891:24000
Rion sandy loam, 8 to 15 percent slopesRnC7631136453t7znc10919891:24000
Rion sandy loam, 25 to 45 percent slopesRoF52124393132mw9jnc14519871:24000
Rion sandy loam, 25 to 45 percent slopesRnE115591111033qlznc14919921:24000
Rion-Cliffside complex, 25 to 45 percent slopes, very stonyRtE25211111053qm1nc14919921:24000
Rion-Ashlar-Rock outcrop complex, 45 to 70 percent slopesRoF16241111043qm0nc14919921:24000
Rion loamy sand, 8 to 15 percent slopesRnC10041174613y72nc15119981:24000
Rion loamy sand, 15 to 25 percent slopesRnD5421174623y73nc15119981:24000
Rion-Wedowee complex, 2 to 8 percent slopesRnB44431150103vp0nc15919961:24000
Rion-Wedowee-Ashlar complex, 2 to 8 percent slopesRoB42731150123vp2nc15919961:24000
Rion-Wedowee complex, 8 to 15 percent slopesRnC31751150113vp1nc15919961:24000
Rion-Wedowee-Ashlar complex, 8 to 15 percent slopesRoC10281150133vp3nc15919961:24000
Rion sandy loam, 25 to 45 percent slopesRaE87581176443ydznc16119971:24000
Rion-Cliffside complex, 25 to 60 percent slopes, very stonyRnE22471176463yf1nc16119971:24000
Rion-Ashlar-Rock outcrop complex, 45 to 70 percent slopesRcF21141176453yf0nc16119971:24000
Rawlings-Rion complex, 6 to 10 percent slopesRgC2743430502682xhbbnc18319661:24000
Rawlings-Rion complex, 10 to 15 percent slopesRgD2125430502662xhb8nc18319661:24000
Rawlings-Rion complex, 2 to 6 percent slopesRgB1485230502672xhb9nc18319661:24000
Rion loamy sand, 15 to 40 percent slopesRnF56601322014fkksc02319771:20000
Wateree-Rion complex, 15 to 40 percent slopesWaF45751322094fktsc02319771:20000
Wateree-Rion complex, 6 to 15 percent slopesWaD12951322084fkssc02319771:20000
Rion sandy loam, 15 to 40 percent slopes, very boulderyRoF34431320394fdbsc02519891:20000
Rion sandy loam, 2 to 6 percent slopesRnB16141320374fd8sc02519891:20000
Rion sandy loam, 6 to 15 percent slopes, very boulderyRoD11301320384fd9sc02519891:20000
Wateree-Rion complex, 15 to 40 percent slopesWaF208151299354c6gsc03919771:20000
Rion loamy sand, 15 to 40 percent slopesRnF110901299254c64sc03919771:20000
Wateree-Rion complex, 6 to 15 percent slopesWaD90951299344c6fsc03919771:20000
Rion gravelly sandy loam, 6 to 15 percent slopesRoD3623943692lcjqsc05719671:20000
Rion gravelly sandy loam, 15 to 40 percent slopesRoF923943702lcjrsc05719671:20000
Rion sandy loam, 15 to 25 percent slopes, moderately erodedRnE29978639487pgfmsc07120051:24000
Rion sandy loam, 10 to 15 percent slopes, moderately erodedRnD25676639486pgflsc07120051:24000
Rion sandy loam, 15 to 25 percent slopes, moderately eroded47D2426214592961kzj2sc07120051:24000
Rion sandy loam, 6 to 10 percent slopes, moderately erodedRnC23186639485pgfksc07120051:24000
Rion sandy loam, 25 to 50 percent slopes, moderately erodedRnF21890639488pgfnsc07120051:24000
Rion sandy loam, 25 to 50 percent slopes, moderately eroded47E2104514592951kzj1sc07120051:24000
Rion sandy loam, 7 to 15 percent slopes, moderately eroded47C2102414592971kzj3sc07120051:24000
Rion sandy clay loam, 15 to 25 percent slopes, severely eroded48D3214592941kzj0sc07120051:24000
Rion sandy loam, 10 to 15 percent slopesRnD157825138622lq36sc09120131:15840
Rawlings-Rion complex, 6 to 10 percent slopesRaC147925138612lq35sc09120131:15840
Rion sandy loam, 15 to 25 percent slopesRnE115625138632lq37sc09120131:15840
Appling sandy loam, 15 to 30 percent slopesApE4451309204d77sc60219601:20000
Rion gravelly sandy loam, 15 to 40 percent slopesRoF52511302334cj2sc61019851:20000
Rion gravelly sandy loam, 6 to 15 percent slopesRoD29531302324cj1sc61019851:20000
Rion-Ashlar sandy loam, 8 to 15 percent slopes24C1261724207562m7zxva02520071:24000
Rion sandy loam, 2 to 8 percent slopes23B225724207542m7zvva02520071:24000
Rion sandy loam, 15 to 25 percent slopes23D124424207552m7zwva02520071:24000
Rion sandy loam, 15 to 25 percent slopes17D115712104341ymva03319961:24000
Rion sandy loam, 15 to 25 percent slopes923D32024531532nbpzva13519561:20000
Rion-Ashlar sandy loam, 8 to 15 percent slopes924C17924531542nbq0va13519561:20000
Rion sandy loam, 2 to 8 percent slopes923B1024531522nbpyva13519561:20000
Rion-Ashlar sandy loam, 8 to 15 percent slopes924C97024818822p9lqva65319911:24000
Rion sandy loam, 15 to 25 percent slopes923D33024818812p9lpva65319911:24000
Rion sandy loam, 2 to 8 percent slopes923B24924818802p9lnva65319911:24000

Map of Series Extent

Approximate geographic distribution of the RION soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .