Official Series Description


Lab Data Summary

Aggregate lab data for the FAIRBURN soil series. This aggregation is based on all pedons with a current taxon name of FAIRBURN, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to FAIRBURN were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Click the image to view it full size.

Pedons used in the lab summary:

MLRALab IDPedon IDTaxonnameCINSSL / NASIS ReportsLink To SoilWeb GMap
6485P0648S1985SD103008Fairburn7Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties43.7266655,-102.4736099

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the FAIRBURN soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the FAIRBURN series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the FAIRBURN series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the FAIRBURN series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Competing Series

Soil series competing with FAIRBURN share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the FAIRBURN series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the FAIRBURN series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with FAIRBURN, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

Click a link below to display the diagram. Note that these diagrams may be from multiple survey areas.

  1. SD-2012-03-15-13 | Custer and Pennington Counties, Prairie Parts - May 1996

    Pattern of soils, topography, and underlying material in the Cedarpass-Denby-Interior and the Orella-Fairburn-Badland associations (Soil Survey of Custer and Pennington Counties, Prairie Parts, SD; 1996).

Map Units

Map units containing FAIRBURN as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Fairburn-Samsil-Badland complex, 10 to 45 percent slopes278246013877602wlrlmt64319671:20000
Ucross-Iwait-Fairburn loams, 3 to 30 percent slopes225125313877502tzbzmt64319671:20000
Ucross-Fairburn loams, 15 to 45 percent slopes32481313877761hl2zmt64319671:20000
Ironbutte-Fairburn-Mittenbutte complex, wooded, 3 to 60 percent slopes29158813877662v09ymt64319671:20000
Ucross-Fairburn loams, 3 to 15 percent slopes3236313877752wlrjmt64319671:20000
Pierre-Fairburn-Ucross complex, moist, 6 to 25 percent slopesP324D344126688672rvg7sd01919701:24000
Pierre-Fairburn-Ucross complex, moist, 10 to 50 percent slopesP324F261526688642rvg8sd01919701:24000
Pierre-Fairburn-Rock outcrop complex, moist, 15 to 60 percent slopesP320F34727680972rvg6sd01919701:24000
Fairburn-Ucross loams, 6 to 30 percent slopesP130E301276809230wn5sd01919701:24000
Fairburn-Penrose, moist-Rock outcrop complex, 15 to 40 percent slopesP126E30027331572rvdbsd04719801:24000
Fairburn-Rock outcrop complex, 15 to 60 percent slopesP128F18625474612qt0zsd04719801:24000
Ziggy-Fairburn complex, 2 to 15 percent slopesP558D1927681102s036sd04719801:24000
Pierre-Fairburn-Ucross complex, moist, 6 to 25 percent slopesP324D566627332442rvg7sd08120071:24000
Pierre-Fairburn-Ucross complex, moist, 10 to 50 percent slopesP324F505127332452rvg8sd08120071:24000
Pierre-Fairburn-Rock outcrop complex, moist, 15 to 60 percent slopesP320F186527332402rvg6sd08120071:24000
Pierre-Fairburn-Ucross complex, moist, 6 to 25 percent slopesP324D976327334202rvg7sd60019741:24000
Fairburn-Butche complex, 15 to 40 percent slopesP124E490427334212qt2psd60019741:24000
Pierre-Fairburn-Ucross complex, moist, 10 to 50 percent slopesP324F57527681182rvg8sd60019741:24000
Recluse-Fairburn loams, moist, 6 to 15 percent slopesP367D7227681222s03hsd60019741:24000
Fairburn-Rock outcrop complex, moist, 15 to 60 percent slopesP129F4227681142s03csd60019741:24000
Pierre-Fairburn-Rock outcrop complex, moist, 15 to 60 percent slopesP320F3927681172rvg6sd60019741:24000
Fairburn clay loam, 9 to 40 percent slopesFaE3666125808982tvt3sd60620111:24000
Fairburn-Orella-Badland complex, 15 to 45 percent slopesFoF262012580901cyh4sd60620111:24000
Fairburn gravelly clay loam, 15 to 45 percent slopes, boulderyFgE65612580899cyh2sd60620111:24000
Fairburn-Badland complex, 9 to 40 percent slopesFhE410325809002zj54sd60620111:24000
Fairburn-Orella, very channery-Whitewater complex, 6 to 40 percent slopesU205F130925829082qqtnsd60620111:24000
Fairburn-Rock outcrop complex, 15 to 60 percent slopesP128F1507025474602qt0zsd60720111:24000
Norrest-Fairburn-Metre complex, 9 to 40 percent slopesP280E1242927456732rxt9sd60720111:24000
Fairburn-Rock outcrop complex, moist, 15 to 60 percent slopesP129F400127456502s03csd60720111:24000
Recluse-Fairburn loams, dry, 6 to 15 percent slopesP366D383927456882rwf6sd60720111:24000
Ziggy-Fairburn complex, 2 to 15 percent slopesP558D329427457022s036sd60720111:24000
Norrest-Fairburn-Metre complex, cool, 9 to 40 percent slopesQ0641E224625866352mj5tsd60720111:24000
Recluse-Fairburn loams, moist, 6 to 15 percent slopesP367D127327456892s03hsd60720111:24000
Pierre-Fairburn-Ucross complex, 9 to 25 percent slopesP322D116527456492rxtfsd60720111:24000
Pierre-Fairburn-Ucross complex, moist, 6 to 25 percent slopesP324D84027681442rvg7sd60720111:24000
Fairburn-Orella, very channery-Whitewater complex, 6 to 40 percent slopesU205F767325474302qqtnsd61220111:20000
Fairburn clay loam, 9 to 40 percent slopesU200F181723751122tvt3sd61220111:20000
Fairburn-Orella, very channery-Whitewater complex, 6 to 40 percent slopesU205F887125828392qqtnsd61320111:24000
Fairburn-Ucross loams, 10 to 30 percent slopes166383033492492yv6xwy01119781:24000
Recluse-Fairburn loams, 6 to 10 percent slopesP364C1722627680332rxsfwy01119781:24000
Fairburn-Ucross loams, 6 to 30 percent slopesP130E15470254745830wn5wy01119781:24000
Mittenbutte-Fairburn complex, moist, 10 to 30 percent slopesP236E758427459322rvdjwy01119781:24000
Fairburn-Mittenbutte-Badland complex, 3 to 60 percent slopes22563747801352wlrnwy01119781:24000
Recluse-Fairburn loams, 1 to 6 percent slopesP364B149927458032rxsdwy01119781:24000
Ucross-Iwait-Fairburn loams, 3 to 30 percent slopes24314467802222tzbzwy01119781:24000
Fairburn-Rock outcrop complex, 15 to 60 percent slopesP128F82125474592qt0zwy01119781:24000
Ucross-Fairburn loams, 3 to 15 percent slopes2417257802062wlrjwy01119781:24000
Ucross-Fairburn loams, 15 to 45 percent slopes2446467802232wlqdwy01119781:24000
Pierre-Fairburn-Rock outcrop complex, moist, 15 to 60 percent slopesP320F6027681852rvg6wy01119781:24000
Oldwolf-Fairburn loams, 6 to 15 percent slopesP300D5227681802rvfywy01119781:24000
Pierre-Fairburn-Ucross complex, moist, 6 to 25 percent slopesP324D2727681862rvg7wy01119781:24000
Oldwolf-Fairburn loams, 3 to 15 percent slopes230187801452yrz0wy01119781:24000
Ucross-Iwait-Fairburn loams, wooded, 3 to 30 percent slopes248167802142yryswy01119781:24000
Mittenbutte-Fairburn complex, moist, 10 to 30 percent slopesP236E90727460182rvdjwy04519841:24000
Fairburn-Ucross loams, 6 to 30 percent slopesP130E411254745730wn5wy04519841:24000
Ucross-Fairburn-Ziggy loams, 6 to 30 percent slopesP530E9127682172s02pwy04519841:24000
Oldwolf-Fairburn loams, 6 to 15 percent slopesP300D7027459772rvfywy04519841:24000
Recluse-Fairburn loams, 6 to 10 percent slopesP364C1227682012rxsfwy04519841:24000
Ziggy-Fairburn complex, 2 to 15 percent slopesP558D527682182s036wy04519841:24000
Ucross-Iwait-Fairburn loams, 3 to 30 percent slopes225256503499252tzbzwy60519951:24000
Cromack-Fairburn-Ucross complex, 3 to 20 percent slopes2075913349905cr38wy60519951:24000
Ironbutte-Fairburn-Mittenbutte complex, 6 to 40 percent slopes23956693499392wlqhwy60519951:24000
Ucross-Fairburn loams, 15 to 45 percent slopes3245632565972wlqdwy60519951:24000
Fairburn-Baux-Rock outcrop complex, 30 to 60 percent slopes254443613609982wlqfwy63319871:24000
Fairburn-Ironbutte-Rock outcrop complex, 0 to 60 percent slopes75020223837831hjnwwy63319871:24000
Fairburn-Ucross-Iwait complex, 6 to 25 percent slopes85512223839301hjtcwy63319871:24000
Fairburn-Mittenbutte complex, 6 to 45 percent slopes, cobbly8533124948031hk54wy63319871:24000
Ucross-Iwait-Fairburn loams, 3 to 30 percent slopes2251072578175912tzbzwy70520031:24000
Ironbutte-Fairburn-Mittenbutte complex, wooded, 3 to 60 percent slopes291700748176322v09ywy70520031:24000
Fairburn-Samsil-Badland complex, 10 to 45 percent slopes278628738176342wlrlwy70520031:24000
Ucross-Fairburn loams, 15 to 45 percent slopes324478788175932wlqdwy70520031:24000
Ironbutte-Fairburn-Mittenbutte complex, 6 to 40 percent slopes239355088176492wlqhwy70520031:24000
Ucross-Fairburn loams, 3 to 15 percent slopes323198118175942wlrjwy70520031:24000
Fairburn-Mittenbutte-Badland complex, 3 to 60 percent slopes277153408176292wlrnwy70520031:24000
Ucross-Fairburn loams, wooded, 10 to 50 percent slopes325143468175962yryrwy70520031:24000
Ucross-Iwait-Fairburn loams, wooded, 3 to 30 percent slopes326134418176432yryswy70520031:24000
Oldwolf-Fairburn loams, 3 to 15 percent slopes299129098175662yrz0wy70520031:24000
Fairburn-Samsil-Badland complex, wooded, 6 to 50 percent slopes279115088176462ztzmwy70520031:24000
Cromack-Fairburn-Ucross complex, 3 to 20 percent slopes20782817578wfrhwy70520031:24000
Fairburn-Ironbutte-Rock outcrop complex, 0 to 60 percent slopes7501087913864091hjnwwy71920131:24000
Fairburn-Mittenbutte complex, 6 to 45 percent slopes752443013854141hhmswy71920131:24000
Fairburn-Mittenbutte complex, 6 to 45 percent slopes, cobbly853349313868821hk54wy71920131:24000
Fairburn-Ucross-Iwait complex, 6 to 25 percent slopes855294213865481hjtcwy71920131:24000
Fairburn-Baux-Rock outcrop complex, 30 to 60 percent slopes79040418685992wlqfwy71920131:24000

Map of Series Extent

Approximate geographic distribution of the FAIRBURN soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .