Official Series Description


Lab Data Summary

Aggregate lab data for the OTTUMWA soil series. This aggregation is based on all pedons with a current taxon name of OTTUMWA, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to OTTUMWA were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Click the image to view it full size.

Pedons used in the lab summary:

MLRALab IDPedon IDTaxonnameCINSSL / NASIS ReportsLink To SoilWeb GMap
63A85P065785SD055001Ottumwa7Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties44.314167,-101.8274994
63A85P065885SD103001Ottumwa8Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties44.1466675,-102.0305557
63A85P065985SD103002Ottumwa7Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties44.1452789,-102.0358353

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the OTTUMWA soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the OTTUMWA series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the OTTUMWA series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the OTTUMWA series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D mountains figure.

Click the image to view it full size.

Click the image to view it full size.

Competing Series

Soil series competing with OTTUMWA share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the OTTUMWA series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the OTTUMWA series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with OTTUMWA, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

Click a link below to display the diagram. Note that these diagrams may be from multiple survey areas.

  1. SD-2012-03-15-14 | Custer and Pennington Counties, Prairie Parts - May 1996

    Pattern of soils and underlying material in the Ottumwa-Razor and the Midway-Razor associations (Soil Survey of Custer and Pennington Counties, Prairie Parts, SD; 1996).

  2. SD-2012-03-15-39 | Haakon County - 1998

    Typical pattern of soils and parent material in the Nimbro, Samsil-Pierre, and Kirley-Lakoma-Vivian associations (Soil Survey of Haakon County, SD; 1998).

  3. SD-2012-03-15-41 | Haakon County - 1998

    Typical pattern of soils and parent material in the Ottumwa-Lakoma-Kolls and Ottumwa-Lakoma associations (Soil Survey of Haakon County, SD; 1998).

  4. SD-2012-03-15-42 | Haakon County - 1998

    Typical pattern of soils and parent material in the Ottumwa-Kirley and Ottumwa-Razor-Midway associations (Soil Survey of Haakon County, SD; 1998).

Map Units

Map units containing OTTUMWA as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Ottumwa silty clay, 3 to 6 percent slopesOtB112487354132cwhmsd05519921:24000
Ottumwa-Lakoma complex, 3 to 6 percent slopesOwB532963541342v676sd05519921:24000
Ottumwa-Lakoma silty clays, 6 to 9 percent slopesOwC431903541352tj7zsd05519921:24000
Ottumwa silty clay, 0 to 3 percent slopesOtA27492354131cwhlsd05519921:24000
Ottumwa-Capa complex, 0 to 3 percent slopesOvA25430354133cwhnsd05519921:24000
Kirley-Ottumwa complex, 2 to 6 percent slopesKmB19228354101cwgmsd05519921:24000
Ottumwa-Razor silty clays, 6 to 9 percent slopesOxC18422354136cwhrsd05519921:24000
Ottumwa-Razor-Savo complex, 6 to 15 percent slopesOyC12385354137cwhssd05519921:24000
Kirley-Ottumwa complex, 6 to 9 percent slopesKmC3675354102cwgnsd05519921:24000
Kirley-Ottumwa complex, 0 to 2 percent slopesKmA662354100cwglsd05519921:24000
Ottumwa silty clay, 0 to 3 percent slopesOvA30210159591335wsd11719771:24000
Ottumwa-Lakoma complex, 3 to 6 percent slopesOwB22210159602v676sd11719771:24000
Ottumwa-Lakoma silty clays, 6 to 9 percent slopesOwC8310159622tj7zsd11719771:24000
Ottumwa clay, 2 to 6 percent slopesOtB193742580948cyjnsd60620111:24000
Ottumwa-Razor complex, 6 to 9 percent slopesOvC82882580949cyjpsd60620111:24000
Ottumwa clay, 0 to 2 percent slopesOtA63532580947cyjmsd60620111:24000

Map of Series Extent

Approximate geographic distribution of the OTTUMWA soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .