Official Series Description


Lab Data Summary

Aggregate lab data for the TRACY soil series. This aggregation is based on all pedons with a current taxon name of TRACY, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to TRACY were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Click the image to view it full size.

Pedons used in the lab summary:

MLRALab IDPedon IDTaxonnameCINSSL / NASIS ReportsLink To SoilWeb GMap
98LP78011978IN091001Tracy2Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties41.4426333,-86.9238667
9840A5298S1970IN127001Tracy7Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties41.3675003,-87.035553
n/a40A5294S1970IN091001Tracy7Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Propertiesn/a

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the TRACY soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the TRACY series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the TRACY series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the TRACY series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D mountains figure.

Click the image to view it full size.

Click the image to view it full size.

Competing Series

Soil series competing with TRACY share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the TRACY series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the TRACY series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with TRACY, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

Click a link below to display the diagram. Note that these diagrams may be from multiple survey areas.

  1. IN-2010-09-27-04 | St. Joseph County -

    Typical pattern of soils and underlying material in the Coloma-Oshtemo-Brady association (Soil Survey of St. Joseph County, Indiana).

  2. IN-2010-09-27-06 | St. Joseph County -

    Typical pattern of soils and underlying material in the Coupee-Tracy association (Soil Survey of St. Joseph County, Indiana).

  3. IN-2010-09-27-07 | St. Joseph County -

    Typical pattern of soils and underlying material in the Tracy-Hillsdale-Tyner association (Soil Survey of St. Joseph County, Indiana).

  4. IN-2012-01-19-35 | Lake County - July 1972

    Oakville-Tawas, Plainfield-Watseka, Maumee-Bono-Warners, and Alida-Del Rey-Whitaker soil associations. The Oakville-Tawas association is on the left (Soil Survey of Lake County, Indiana; 1972).

Map Units

Map units containing TRACY as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Tracy loam, 2 to 6 percent slopesTcB112027250094kbin08919671:15840
Tracy loam, 0 to 2 percent slopesTcA96127249994k9in08919671:15840
Tracy loam, 6 to 12 percent slopesTcC47827250194kcin08919671:15840
Tracy loam, silty clay loam substratum, 2 to 6 percent slopesTrB27427250294kdin08919671:15840
Tracy sandy loam, 2 to 6 percent slopesTcB328382726952zdj8in09119791:15840
Tracy sandy loam, 0 to 2 percent slopesTcA212582726942zdj7in09119791:15840
Tracy sandy loam, 6 to 12 percent slopes, moderately erodedTcC2133152726962zdjbin09119791:15840
Tracy sandy loam, 12 to 18 percent slopesTcD248772726972zdjcin09119791:15840
Tracy sandy loam, 18 to 35 percent slopesTcF12392726982zdjfin09119791:15840
Tracy sandy loam, 2 to 6 percent slopesTcB58881606882zdj8in12719781:15840
Tracy sandy loam, 0 to 2 percent slopesTcA39511606872zdj7in12719781:15840
Tracy sandy loam, 6 to 12 percent slopesTcC27041606892zdj9in12719781:15840
Tracy sandy loam, 12 to 18 percent slopesTcD13631606902zdjcin12719781:15840
Tracy sandy loam, 2 to 6 percent slopesTmpB61056151142zdj8in14120011:12000
Tracy sandy loam, 6 to 12 percent slopes, moderately erodedTmpC234026151132zdjbin14120011:12000
Tracy sandy loam, 0 to 2 percent slopesTmpA26146151122zdj7in14120011:12000
Urban land-Tracy complex, 2 to 6 percent slopesUmwB16506151202zdjhin14120011:12000
Tracy sandy loam, 12 to 18 percent slopesTmpD16096185342zdjcin14120011:12000
Urban land-Tracy complex, 0 to 2 percent slopesUmwA13266151212zdjgin14120011:12000
Hillsdale-Tracy sandy loams, 5 to 10 percent slopes, erodedHkpC21122625136nzhpin14120011:12000
Urban land-Tracy complex, 6 to 12 percent slopesUmwC5576151192zdjjin14120011:12000
Hillsdale-Tracy sandy loams, 10 to 18 percent slopes, erodedHkpD2547625142nzhwin14120011:12000
Urban land-Hillsdale-Tracy complex, 5 to 10 percent slopesUhpC502625559nzybin14120011:12000
Urban land-Tracy complex, 12 to 18 percent slopesUmwD1086185352zdjkin14120011:12000
Urban land-Hillsdale-Tracy complex, 10 to 18 percent slopesUhpD63625557nzy8in14120011:12000

Map of Series Extent

Approximate geographic distribution of the TRACY soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .