Soil Data Explorer - SUTKIN

Official Series Description

Lab Data Summary

Aggregate lab data for the SUTKIN soil series. This aggregation is based on all pedons with a current taxon name of SUTKIN, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to SUTKIN were used in the calculation. Source: KSSL snapshot (updated 2020-03-18). Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Pedons used in the lab summary:

MLRA	Lab ID	Pedon ID	Taxonname	CI	NSSL / NASIS Reports	Link To SoilWeb GMap
6	90P0726	90WA077005	Sutkin	6	Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties	46.48,-120.9725

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the SUTKIN soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the SUTKIN series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot (updated 2024-02-21), parsed OSD records (updated 2023-10-06) and snapshot of SC database (updated 2023-10-02).

Select annual climate data summaries for the SUTKIN series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2023-10-09).

Geomorphic description summaries for the SUTKIN series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records (updated 2023-10-04).

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Competing Series

Soil series competing with SUTKIN share the same family level classification in Soil Taxonomy. Source: parsed OSD records (updated 2023-10-06) and snapshot of the SC database (updated 2023-10-02).

Select annual climate data summaries for the SUTKIN series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2023-10-09).

Geomorphic description summaries for the SUTKIN series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records (updated 2023-10-04).

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with SUTKIN, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database (updated 2023-10-02).

Block Diagrams

No block diagrams are available.

Map Units

Map units containing SUTKIN as a major component. Limited to 250 records.

Map Unit Name	Symbol	Map Unit Area (ac)	Map Unit Key	National Map Unit Symbol	Soil Survey Area	Publication Date	Map Scale
Sutkin stony loam, 25 to 45 percent slopes	191	113	76715	2ktp	wa637	2008	1:24000
Sutkin stony loam 35 to 60 percent slopes	665	4120	86300	2wsw	wa676	2014	1:12000
Sutkin stony loam, 5 to 20 percent slopes	662	2180	86298	2wst	wa676	2014	1:12000
Sutkin, warm-Rubble land complex, 35 to 60 percent slopes	6601	920	86772	2x93	wa676	2014	1:12000
Sutkin stony loam, 20 to 35 percent slopes	663	700	86299	2wsv	wa676	2014	1:12000
Sutkin stony loam, 25 to 45 percent slopes	146	14976	68932	29qm	wa677	1979	1:24000
Sutkin stony loam, 0 to 25 percent slopes	145	7874	68931	29ql	wa677	1979	1:24000
Sutkin stony loam, 45 to 65 percent slopes	147	3304	68933	29qn	wa677	1979	1:24000
Sutkin stony loam, 25 to 45 percent south slopes	148	3130	68934	29qp	wa677	1979	1:24000
Bocker-Sutkin complex, 0 to 7 percent slopes	9	2133	69062	29vt	wa677	1979	1:24000
Sutkin-Rock outcrop complex, 25 to 75 percent slopes	149	1835	68935	29qq	wa677	1979	1:24000
Sutkin variant stony loam, 0 to 5 percent slopes	150	576	68937	29qs	wa677	1979	1:24000
Sutkin stony loam, 25 to 45 percent slopes	116	246	75325	2jcv	wa680	2003	1:24000
Sutkin stony loam, 45 to 65 percent slopes	117	99	75326	2jcw	wa680	2003	1:24000

Map of Series Extent

Approximate geographic distribution of the SUTKIN soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry (updated 2023-10-04).