Official Series Description


Lab Data Summary

Aggregate lab data for the SPYGLASS-LIKE soil series. This aggregation is based on all pedons with a current taxon name of SPYGLASS-LIKE, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to SPYGLASS-LIKE were used in the calculation. Source: KSSL snapshot (updated 2020-03-18). Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

There are insufficient data to create the lab data summary figure.


Water Balance

Monthly water balance estimated using a leaky-bucket style model for the SPYGLASS-LIKE soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

There are insufficient data to create the water balance bar figure.



There are insufficient data to create the water balance line figure.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the SPYGLASS-LIKE series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot (updated 2024-10-24), parsed OSD records (updated 2024-10-23) and snapshot of SC database (updated 2024-10-23).

There are insufficient data to create the sibling sketch figure.

Select annual climate data summaries for the SPYGLASS-LIKE series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2024-10-23).

There are insufficient data to create the annual climate figure.

Geomorphic description summaries for the SPYGLASS-LIKE series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records (updated 2024-10-23).

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Competing Series

Soil series competing with SPYGLASS-LIKE share the same family level classification in Soil Taxonomy. Source: parsed OSD records (updated 2024-10-23) and snapshot of the SC database (updated 2024-10-23).

There are insufficient data to create the competing sketch figure.

Select annual climate data summaries for the SPYGLASS-LIKE series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2024-10-23).

There are insufficient data to create the annual climate figure.

Geomorphic description summaries for the SPYGLASS-LIKE series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records (updated 2024-10-23).

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with SPYGLASS-LIKE, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database (updated 2024-10-23).

This figure is not available.

Block Diagrams

No block diagrams are available.

Map Units

Map units containing SPYGLASS-LIKE as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Spyglass-like-Ulm-like complex, 2 to 20 percent slopes2C0133566842zb02wy04319761:24000
Renohill-like-Spyglass-like-Hilight complex, 2 to 30 percent slopes533333566702ynm3wy04319761:24000
Spyglass-like-Ulm-Avar-like complex, 2 to 6 percent slopes223833566622ynm1wy04319761:24000
Menoken-like-Turnback-Spyglass-like complex, 4 to 15 percent slopesS34731709322z1yzwy6031:24000
Spyglass-like-Ulm-Avar-like complex, 2 to 6 percent slopes223833028772ynm1wy6171:24000
Renohill-like-Spyglass-like-Hilight complex, 2 to 30 percent slopes533333582852ynm3wy6171:24000
Spyglass-like-Ulm-like complex, 2 to 20 percent slopes2C0131970352zb02wy6171:24000
Spyglass-like clay loam, 0 to 1 percent slopes2A0533028673014mwy6171:24000
Spyglass-like-Gypimack-like complex, 2 to 6 percent slopes2B0633028683014nwy6171:24000
Bowbac-Spyglass-like-Worfka complex, 2 to 25 percent slopes535731709502z1zdwy6291:24000
Menoken-like-Turnback-Spyglass-like complex, 4 to 15 percent slopesS34731709332z1yzwy6291:24000
Renohill-like-Spyglass-like-Hilight complex, 2 to 30 percent slopes533331332442ynm3wy6291:24000
Spyglass-like-Ulm-Avar-like complex, 2 to 6 percent slopes223831332422ynm1wy6291:24000

Map of Series Extent

Approximate geographic distribution of the SPYGLASS-LIKE soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry (updated 2024-10-30).