Official Series Description


Lab Data Summary

Aggregate lab data for the SPRINGPORT soil series. This aggregation is based on all pedons with a current taxon name of SPRINGPORT, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to SPRINGPORT were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Click the image to view it full size.

Pedons used in the lab summary:

MLRALab IDPedon IDTaxonnameCINSSL / NASIS ReportsLink To SoilWeb GMap
9205N0189S2004MI131018Springport7Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties46.6959953,-89.033165
94A94P0181S1993MI069002Springport7Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties44.2630539,-83.6609879

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the SPRINGPORT soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the SPRINGPORT series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the SPRINGPORT series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the SPRINGPORT series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D mountains figure.

Click the image to view it full size.

Click the image to view it full size.

Competing Series

Soil series competing with SPRINGPORT share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the SPRINGPORT series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

There are insufficient data to create the annual climate figure.

Geomorphic description summaries for the SPRINGPORT series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with SPRINGPORT, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

Click a link below to display the diagram. Note that these diagrams may be from multiple survey areas.

  1. MI-2010-09-07-06 | Kalkaska County - 2005

    Typical pattern of soils and parent material in the Algonquin-Allendale-Negwegon general soil map unit (Soil Survey of Kalkaska County, Michigan; 2005).

  2. MI-2010-09-07-22 | Montmorency County - 2003

    Typical pattern of soils and underlying material in the Algonquin-Negwegon-Springport association (Soil Survey of Montmorency County, Michigan; 2003).

  3. MI-2012-02-06-02 | Alcona County - 1998

    Typical pattern of soils and parent material in the Algonquin-Negwegon-Springport association (adjacent to the Au Gres-Wakeley-Tawas association) (Soil Survey of Alcona County, Michigan; 1998).

Map Units

Map units containing SPRINGPORT as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Algonquin-Springport complex, 0 to 6 percent slopes59B72241903456d25mi00119931:20000
Springport clay loam5537241903416d21mi00119931:20000
Algonquin-Springport complex, 0 to 6 percent slopes59B28431912986f1xmi00719981:12000
Springport clay loam, drained5518931913276f2vmi00719981:12000
Algonquin till substratum-Springport till substratum complex, 0 to 4 percent slopes477B10261913926f4ymi00719981:12000
Springport silty clay loam, till substratum4786561913956f51mi00719981:12000
Springport silt loam371251913766f4fmi00719981:12000
Springport silt loam, 0 to 2 percent slopesSrpaaA104131559422ycxkmi00919761:15840
Springport silt loam, 0 to 2 percent slopesSrpaaA2531870342ycxkmi02919701:15840
Whittemore-Springport complex, 0 to 3 percent slopes367A37951918306fm2mi06919951:15840
Manary-Whittemore-Springport complex, 0 to 3 percent slopes436A23551918746fnhmi06919951:15840
Algonquin-Springport complex, 0 to 3 percent slopes379A11391918396fmcmi06919951:15840
Springport silt loam3719721918346fm6mi06919951:15840
Springport clay loam551051918996fp9mi06919951:15840
Algonquin-Springport complex, 0 to 6 percent slopes59B151919036fpfmi06919951:15840
Springport silt loam3714231906786ddxmi07919981:12000
Allendale-Springport complex, 0 to 3 percent slopes461A3541906846df3mi07919981:12000
Algonquin-Springport complex, 0 to 6 percent slopes59B41701923196g3vmi11919971:12000
Springport silt loam3719571922626g20mi11919971:12000
Negwegon-Springport complex, 0 to 6 percent slopes171B156315292021nb83mi13120071:24000
Springport silty clay, 0 to 1 percent slopes16851514566091kwqdmi13120071:24000
Algonquin-Springport silt loams, 0 to 3 percent slopes512A2854654006pyjzmi13520031:12000
Springport silt loam371455268383908jmi13520031:12000

Map of Series Extent

Approximate geographic distribution of the SPRINGPORT soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .