Official Series Description


Lab Data Summary

Aggregate lab data for the SPRINGHILL soil series. This aggregation is based on all pedons with a current taxon name of SPRINGHILL, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to SPRINGHILL were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Click the image to view it full size.

Pedons used in the lab summary:

MLRALab IDPedon IDTaxonnameCINSSL / NASIS ReportsLink To SoilWeb GMap
133AS01AL-041-101AL041001-pgmSpringhill3Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties31.7125,-86.3527778
133AS87AL-109-787AL109007-pgmSpringhill3Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties31.6477832794189,-86.0383377075195
133AS91AL-087-191AL087001-pgmSpringhill3Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties32.495,-85.9488889
133AS92AL-113-192AL113001-pgmSpringhill3Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties32.1166667,-85.1655556

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the SPRINGHILL soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the SPRINGHILL series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the SPRINGHILL series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the SPRINGHILL series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D mountains figure.

Click the image to view it full size.

Click the image to view it full size.

Competing Series

Soil series competing with SPRINGHILL share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the SPRINGHILL series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the SPRINGHILL series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D mountains figure.

Click the image to view it full size.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with SPRINGHILL, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

No block diagrams are available.

Map Units

Map units containing SPRINGHILL as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Luverne-Springhill complex, 15 to 45 percent slopesLsE46400328231c0k3al00520011:24000
Springhill-Nankin complex, 15 to 25 percent slopesSnE32140328244c0kjal00520011:24000
Springhill loamy sand 5 to 8 percent slopesSgC22230328227c0jzal00520011:24000
Springhill-Lucy complex, 15 to 25 percent slopesSlE14030328271c0ldal00520011:24000
Springhill-Troup complex, 8 to 15 percent slopesStD5570328270c0lcal00520011:24000
Springhill sandy loam, 2 to 5 percent slopesSpB57189573721mntal03720061:24000
Nankin-Springhill-Lucy complex, 15 to 35 percent slopesNsE854007627332v5lnal04120051:24000
Springhill sandy loam, 8 to 15 percent slopes, erodedSpD212420330517c2xval04120051:24000
Springhill sandy loam, 5 to 8 percent slopes, erodedSpC21300779770v5dwal04120051:24000
Nankin-Lucy-Springhill complex, 12 to 20 percent slopesNpE3296633099p7skal06920021:24000
Nankin-Springhill-Henderson complex, 8 to 20 percent slopes, cobblyNsE1908609583ng9zal06920021:24000
Nankin-Springhill-Lucy complex, 15 to 35 percent slopesNsF21125146382v5lnal08520111:24000
Troup-Springhill-Luverne complex, 15 to 35 percent slopesTsF5676330499c2x8al08719971:24000
Lucy-Luverne-Springhill complex, 1 to 5 percent slopesLsB3663330469c2w9al08719971:24000
Springhill sandy loam, 2 to 5 percent slopesSbB1747330493c2x2al08719971:24000
Luverne-Springhill complex, 10 to 35 percent slopesLsE23710331317c3rnal10919961:20000
Springhill sandy loam, 5 to 8 percent slopes, erodedSpC213380331324c3rwal10919961:20000
Springhill-Urban land complex, 2 to 8 percent slopesSuC1990331325c3rxal10919961:20000
Troup-Springhill-Luverne complex, 10 to 30 percent slopesTsE70780331342c3sgal11319971:24000
Luverne-Springhill complex, 15 to 25 percent slopesLsE40410331354c3sval11319971:24000
Springhill sandy loam, 2 to 5 percent slopesSbB5340331364c3t5al11319971:24000
Springhill-Cowarts-Urban land complex, 8 to 15 percent slopesScD940331375c3tjal11319971:24000
Springhill sandy loam, 5 to 15 percent slopesSgD73214764431lkc6al12320051:24000
Springhill-Lucy-Nankin complex, 6 to 15 percent slopesSpD902924860042pfwpsc08519691:20000

Map of Series Extent

Approximate geographic distribution of the SPRINGHILL soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .