Soil Data Explorer - SNOWSLIDE

Official Series Description

Lab Data Summary

Aggregate lab data for the SNOWSLIDE soil series. This aggregation is based on all pedons with a current taxon name of SNOWSLIDE, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to SNOWSLIDE were used in the calculation. Source: KSSL snapshot (updated 2020-03-13). Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

There are insufficient data to create the lab data summary figure.

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the SNOWSLIDE soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the SNOWSLIDE series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot (updated 2024-02-21), parsed OSD records (updated 2023-10-02) and snapshot of SC database (updated 2023-10-02).

Select annual climate data summaries for the SNOWSLIDE series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2023-10-09).

Geomorphic description summaries for the SNOWSLIDE series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records (updated 2023-10-04).

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Competing Series

Soil series competing with SNOWSLIDE share the same family level classification in Soil Taxonomy. Source: parsed OSD records (updated 2023-10-02) and snapshot of the SC database (updated 2023-10-02).

Select annual climate data summaries for the SNOWSLIDE series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2023-10-09).

Geomorphic description summaries for the SNOWSLIDE series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records (updated 2023-10-04).

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with SNOWSLIDE, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database (updated 2023-10-02).

Block Diagrams

No block diagrams are available.

Map Units

Map units containing SNOWSLIDE as a major component. Limited to 250 records.

Map Unit Name	Symbol	Map Unit Area (ac)	Map Unit Key	National Map Unit Symbol	Soil Survey Area	Publication Date	Map Scale
Snowslide gravelly loam, dry, 1 to 10 percent slopes	197	13180	83086	2sg6	id752	1999	1:24000
Snowslide-Zer-Snowslide complex, 5 to 35 percent slopes	202	12728	83093	2sgf	id752	1999	1:24000
Zer-Snowslide complex, 1 to 4 percent slopes	259	6900	83155	2sjf	id752	1999	1:24000
Sprabat-Snowslide complex, 1 to 8 percent slopes	209	5341	83100	2sgn	id752	1999	1:24000
Snowslide-Farvant complex, 10 to 40 percent slopes	201	4859	83092	2sgd	id752	1999	1:24000
Zer-Snowslide complex, 5 to 25 percent slopes	260	3691	83157	2sjh	id752	1999	1:24000
Snowslide very gravelly loam, dry, 20 to 40 percent slopes	199	3400	83088	2sg8	id752	1999	1:24000
Snowslide very gravelly loam, 1 to 6 percent slopes	198	3389	83087	2sg7	id752	1999	1:24000
Snowslide-Badland-Perreau complex, 5 to 35 percent slopes	200	2066	83091	2sgc	id752	1999	1:24000
Snowslide gravelly loam, 2 to 10 percent slopes	110	7226	78934	2n48	id763	1998	1:24000
Zer-Snowslide complex, 5 to 15 percent slopes	146	3902	78977	2n5n	id763	1998	1:24000
Snowslide-Zer complex, 1 to 5 percent slopes	112	3222	78936	2n4b	id763	1998	1:24000
Snowslide gravelly loam, 5 to 20 percent slopes	111	1741	78935	2n49	id763	1998	1:24000
Snowslide-Zer complex, 5 to 35 percent slopes	113	1314	78937	2n4c	id763	1998	1:24000
Packmo-Snowslide complex, 8 to 12 percent slopes	83	634	79105	2n9s	id763	1998	1:24000

Map of Series Extent

Approximate geographic distribution of the SNOWSLIDE soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry (updated 2023-10-04).