Soil Data Explorer | California Soil Resource Lab

Lab Data Summary

Aggregate lab data for the SANDY ALLUVIAL LAND soil series. This aggregation is based on all pedons with a current taxon name of SANDY ALLUVIAL LAND, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to SANDY ALLUVIAL LAND were used in the calculation. Source: KSSL snapshot (updated 2020-03-13). Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

There are insufficient data to create the lab data summary figure.

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the SANDY ALLUVIAL LAND soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

There are insufficient data to create the water balance bar figure.

There are insufficient data to create the water balance line figure.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the SANDY ALLUVIAL LAND series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot (updated 2024-10-24), parsed OSD records (updated 2024-10-23) and snapshot of SC database (updated 2024-10-23).

There are insufficient data to create the sibling sketch figure.

Select annual climate data summaries for the SANDY ALLUVIAL LAND series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2024-10-23).

There are insufficient data to create the annual climate figure.

Geomorphic description summaries for the SANDY ALLUVIAL LAND series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records (updated 2024-10-23).

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Competing Series

Soil series competing with SANDY ALLUVIAL LAND share the same family level classification in Soil Taxonomy. Source: parsed OSD records (updated 2024-10-23) and snapshot of the SC database (updated 2024-10-23).

There are insufficient data to create the competing sketch figure.

Select annual climate data summaries for the SANDY ALLUVIAL LAND series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2024-10-23).

There are insufficient data to create the annual climate figure.

Geomorphic description summaries for the SANDY ALLUVIAL LAND series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records (updated 2024-10-23).

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with SANDY ALLUVIAL LAND, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database (updated 2024-10-23).

This figure is not available.

Block Diagrams

No block diagrams are available.

Map Units

Map units containing SANDY ALLUVIAL LAND as a major component. Limited to 250 records.

Map Unit Name	Symbol	Map Unit Area (ac)	Map Unit Key	National Map Unit Symbol	Soil Survey Area	Publication Date	Map Scale
Sandy alluvial land	SD	15530	1718534	1vp8l	az635	1968	1:31680
Sandy and Gravelly alluvial land	Sa	30261	52921	1s24	az637	1968	1:31680
Sandy alluvial land	Sc	2518	456276	h9sl	ca069	1965	1:20000
Sandy alluvial land, leveled	Sb	290	464441	hl8z	ca654	1966	1:24000
Sandy alluvial land	Sa	157	464440	hl8y	ca654	1966	1:24000
Sandy alluvial land, wet	Sk	964	457491	hc1s	ca672	1966	1:20000
Sandy alluvial land	Sh	902	457490	hc1r	ca672	1966	1:20000
Sandy alluvial land	Sd	6608	457768	hcbq	ca674	1968	1:24000
Sandy alluvial land	Sa	4325	457906	hch5	ca675	1968	1:24000
Sandy alluvial land	Su	11688	94158	34zc	co005	1971	1:20000
Sandy alluvial land	Sa	6414	94958	35t5	co115	1969	1:15840
Sandy alluvial land	Sd	2335	498762	jr03	co622	1968	1:20000
Sandy alluvial land	Sa	18007	95323	365y	co624	1963	1:20000
Sandy alluvial land	Sd	3876	498559	jqsk	co632	1968	1:24000
Sandy alluvial land	rSL	542	467982	hpz6	hi970	1966	1:24000
Sandy alluvial land	Sa	1152	567610	m1n0	ms021	1961	1:20000
Sandy alluvial land	Sa	2739	332045	c4j4	ms023	1963	1:15840
Sandy alluvial land	Sa	1286	567888	m1xz	ms043	1965	1:15840
Sandy alluvial land	Sa	871	332865	c5cl	ms073	1969	1:20000
Sandy alluvial land	Sa	3002	333210	c5qq	ms095	1963	1:15840
Sandy alluvial land	Sd	427	334328	c6ws	ms147	1965	1:20000
Sandy alluvial land	Sa	12	1426022	1jvwq	or601	1968	1:20000
Sandy alluvial lands	Sd	1549	482971	j6kq	ut612	1967	1:20000

Soil Data Explorer - SANDY ALLUVIAL LAND