Official Series Description


Lab Data Summary

Aggregate lab data for the PUROB soil series. This aggregation is based on all pedons with a current taxon name of PUROB, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to PUROB were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Click the image to view it full size.

Pedons used in the lab summary:

MLRALab IDPedon IDTaxonnameCINSSL / NASIS ReportsLink To SoilWeb GMap
3005N012204NV003004Purob6Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties36.2716667,-115.5055556
3009N0817S2009NV003108Purob7Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties36.5168571,-115.1627731
3013N0523S2012NV003002Purob7Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties36.5196667,-115.1633333
3015N0834S2015NV003003Purob6Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties36.269172,-115.519984

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the PUROB soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the PUROB series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the PUROB series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the PUROB series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D mountains figure.

Click the image to view it full size.

There are insufficient data to create the 3D flats position figure.

Competing Series

Soil series competing with PUROB share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the PUROB series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the PUROB series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with PUROB, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

No block diagrams are available.

Map Units

Map units containing PUROB as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Purob-Irongold association73161945468947hqzbnv75520061:24000
Purob extremely gravelly loam, 8 to 30 percent slopes73232330468948hqzcnv75520061:24000
Moentria-Purob Association4221941516011851qr54nv75520061:24000
Purob extremely gravelly loam, 2 to 8 percent slopes733472916810211tf7hnv75520061:24000
Mackscanyon-Purob association725166814256801jvjpnv75520061:24000
Purob-Niavi association7348516001161qq1nnv75520061:24000
Purob-Ferrogold association1102301824804412p837nv75720111:24000
Purob, dry-Ferrogold association4011490324804702p845nv75720111:24000
Quijinump-Purob association211333624804502p83jnv75720111:24000
Purob very gravelly sandy loam, 4 to 15 percent slopes402303124804712p846nv75720111:24000
Purob association400223924804692p844nv75720111:24000
Cruzspring-Purob-Rock outcrop association130149724804452p83cnv75720111:24000
Longjim-Purob-Niavi association20646660606660nc8pnv78519951:24000
Purob-Irongold association20605163469080hr3mnv78519951:24000
Purob-Niavi association20623411607371nd0mnv78519951:24000
Mackscanyon-Purob association172520117120201vghgnv78519951:24000
Purob-Irongold association731633616810101tf74nv78819821:24000
Purob extremely gravelly loam, 8 to 30 percent slopes732112016810111tf75nv78819821:24000

Map of Series Extent

Approximate geographic distribution of the PUROB soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .