Official Series Description


Lab Data Summary

Aggregate lab data for the POKEGEMA soil series. This aggregation is based on all pedons with a current taxon name of POKEGEMA, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to POKEGEMA were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Click the image to view it full size.

Pedons used in the lab summary:

MLRALab IDPedon IDTaxonnameCINSSL / NASIS ReportsLink To SoilWeb GMap
2140A0836S1966OR035001Pokegema5Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties42.12668,-122.1719
2140A0837S1966OR035002Pokegeman/aPrimary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties42.1222229,-122.0966644
2140A0838S1966OR035003Pokegema4Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties42.1866684,-122.081665
2140A0839S1966OR035004Pokegeman/aPrimary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties42.166111,-121.9977798

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the POKEGEMA soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the POKEGEMA series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the POKEGEMA series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the POKEGEMA series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D mountains figure.

Click the image to view it full size.

There are insufficient data to create the 3D flats position figure.

Competing Series

Soil series competing with POKEGEMA share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the POKEGEMA series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the POKEGEMA series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

There are insufficient data to create the 3D hills figure.

Click the image to view it full size.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with POKEGEMA, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

No block diagrams are available.

Map Units

Map units containing POKEGEMA as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Pokegema-Woodcock complex, 1 to 12 percent slopes, mlra 21147C763444696172wzsmor63219891:20000
Woodcock-Pokegema complex, 12 to 35 percent south slopes, mlra 21205E327004696972wzsqor63219891:20000
Woodcock-Pokegema complex, 12 to 35 percent north slopes, mlra 21204E206014696962wzspor63219891:20000
Pokegema-Woodcock complex, warm, 1 to 12 percent slopes, mlra 21148C77744696182wzsnor63219891:20000
Woodcock-Pokegema complex, warm, 12 to 35 percent slopes, mlra 21206E10774696982wzsror63219891:20000
Woodcock-Pokegema complex, 12 to 35 percent north slopes, mlra 21204Ejk389529248272wzspor64019771:20000
Pokegema-Woodcock complex, 1 to 12 percent slopes, mlra 2195B30004888562wzsmor64019771:20000
Pokegema-Woodcock complex, warm, 1 to 12 percent slopes, mlra 2196B6804888552wzsnor64019771:20000
Woodcock-Pokegema complex, warm, 12 to 35 percent slopes, mlra 21206Ejk17529248262wzsror64019771:20000

Map of Series Extent

Approximate geographic distribution of the POKEGEMA soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .