Official Series Description


Lab Data Summary

Aggregate lab data for the PERNITAS soil series. This aggregation is based on all pedons with a current taxon name of PERNITAS, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to PERNITAS were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

There are insufficient data to create the lab data summary figure.


Water Balance

Monthly water balance estimated using a leaky-bucket style model for the PERNITAS soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the PERNITAS series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the PERNITAS series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the PERNITAS series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D mountains figure.

Click the image to view it full size.

Click the image to view it full size.

Competing Series

Soil series competing with PERNITAS share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the PERNITAS series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the PERNITAS series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D mountains figure.

Click the image to view it full size.

Click the image to view it full size.

Soil series sharing subgroup-level classification with PERNITAS, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

Click a link below to display the diagram. Note that these diagrams may be from multiple survey areas.

  1. TX-2010-11-02-49 | Duval County -

    Benavides-Olmedo-Weesatche (Soil Survey of Duval County, Texas).

  2. TX-2010-11-02-51 | Duval County -

    Benavides-Pernitas-Olmedo (Soil Survey of Duval County, Texas).

  3. TX-2010-11-03-11 | Goliad County - 2010

    Pattern of soils and underlying material in the Monteola-Clareville-Pernitas general soil map unit (Soil Survey of Goliad County, Texas; 2010).

  4. TX-2010-11-03-46 | Karnes County - 1999

    Typical pattern of soils in the Coy-Monteola general soil map unit (Soil Survey of Karnes County, Texas; 1999).

  5. TX-2010-11-03-57 | Live Oak County - 2006

    Pattern of soils and underlying material in the Weesatche-Pernitas general soil map unit (Soil Survey of Live Oak County, Texas; 2006).

  6. TX-2010-11-03-58 | Live Oak County - 2006

    Pattern of soils and underlying material in the Olmos-Sarnosa-Weesatche general soil map unit (Soil Survey of Live Oak County, Texas; 2006).

Map Units

Map units containing PERNITAS as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Pernitas sandy clay loam, 2 to 5 percent slopes25375783627622s663tx02519791:24000
Pernitas fine sandy loam, 1 to 5 percent slopesPmC3193424033032s662tx13120081:24000
Pernitas sandy clay loam, 1 to 5 percent slopesPnB1183124033122s664tx13120081:24000
Pernitas sandy clay loam, 2 to 5 percent slopesPtC1890624368872s663tx17520101:24000
Pernitas sandy clay loam, 1 to 5 percent slopes35233363681182s664tx24919761:24000
Pernitas sandy clay loam, 0 to 1 percent slopes34112583681172z7xqtx24919761:24000
Pernitas fine sandy loam, 1 to 5 percent slopes3373673681162s662tx24919761:24000
Pernitas sandy clay loam, gullied, 1 to 8 percent slopes365183681192z7xstx24919761:24000
Pernitas sandy clay loam, 2 to 5 percent slopesPnC461083684252s663tx25519921:24000
Pernitas sandy clay loam, 5 to 8 percent slopesPnD17093684262z7xrtx25519921:24000
Pernitas fine sandy loam, 1 to 5 percent slopesPmC586503696602s662tx29719971:24000
Pernitas sandy clay loam, 1 to 5 percent slopesPnB291833696612s664tx29719971:24000
Pernitas sandy clay loam, 1 to 5 percent slopesPtC209853701422s664tx31120101:24000
Pernitas fine sandy loam, 1 to 5 percent slopesPrC253025015272s662tx31120101:24000

Map of Series Extent

Approximate geographic distribution of the PERNITAS soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .