Official Series Description


Lab Data Summary

Aggregate lab data for the PENDROY soil series. This aggregation is based on all pedons with a current taxon name of PENDROY, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to PENDROY were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Click the image to view it full size.

Pedons used in the lab summary:

MLRALab IDPedon IDTaxonnameCINSSL / NASIS ReportsLink To SoilWeb GMap
5285P035584MT015493PENDROY6Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties48.0321312,-111.1736526
5290P054590MT041002Pendroy5Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties48.9676971,-110.0389099
5240A3650S1967MT013001PENDROY5Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties47.6549072,-111.2644806
53A78P007477MT055028Pendroy7Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties48.0172234,-105.3194427

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the PENDROY soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the PENDROY series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the PENDROY series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the PENDROY series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D mountains figure.

Click the image to view it full size.

Click the image to view it full size.

Competing Series

Soil series competing with PENDROY share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the PENDROY series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

There are insufficient data to create the annual climate figure.

Geomorphic description summaries for the PENDROY series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with PENDROY, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

No block diagrams are available.

Map Units

Map units containing PENDROY as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Pendroy clay, 0 to 4 percent slopes1824921342415ch9nmt02719791:24000
Pendroy clay1182256344314ck8xmt05519811:24000
Pendroy clay, 2 to 4 percent slopesPd191131469034xvtmt60019691:24000
Pendroy clay, 0 to 2 percent slopesPc80421469024xvsmt60019691:24000
Pendroy clay, shale substratumPf46041469054xvwmt60019691:24000
Pendroy clay, 4 to 8 percent slopesPe41111469044xvvmt60019691:24000
Pendroy clay, 0 to 2 percent slopes15114944341814cgp8mt61319751:24000
Pendroy clay, 2 to 8 percent slopes1529846341815cgp9mt61319751:24000
Pendroy clay, 8 to 15 percent slopes1531112341816cgpbmt61319751:24000
Pendroy clay, 0 to 2 percent slopes43A5192346772cmv6mt61519921:24000
Pendroy clay, 0 to 2 percent slopes43A15524347717cntpmt64119941:24000
Pendroy clay, 0 to 2 percent slopes46A1202348667cptbmt65719901:24000

Map of Series Extent

Approximate geographic distribution of the PENDROY soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .