Soil Data Explorer - PAULVILLE

Official Series Description

Lab Data Summary

Aggregate lab data for the PAULVILLE soil series. This aggregation is based on all pedons with a current taxon name of PAULVILLE, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to PAULVILLE were used in the calculation. Source: KSSL snapshot (updated 2020-03-18). Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

There are insufficient data to create the lab data summary figure.

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the PAULVILLE soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the PAULVILLE series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot (updated 2024-10-24), parsed OSD records (updated 2024-10-23) and snapshot of SC database (updated 2024-10-23).

Select annual climate data summaries for the PAULVILLE series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2024-10-23).

Geomorphic description summaries for the PAULVILLE series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records (updated 2024-10-23).

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D flats position figure.

Competing Series

Soil series competing with PAULVILLE share the same family level classification in Soil Taxonomy. Source: parsed OSD records (updated 2024-10-23) and snapshot of the SC database (updated 2024-10-23).

Select annual climate data summaries for the PAULVILLE series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2024-10-23).

Geomorphic description summaries for the PAULVILLE series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records (updated 2024-10-23).

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with PAULVILLE, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database (updated 2024-10-23).

Block Diagrams

No block diagrams are available.

Map Units

Map units containing PAULVILLE as a major component. Limited to 250 records.

Map Unit Name	Symbol	Map Unit Area (ac)	Map Unit Key	National Map Unit Symbol	Soil Survey Area	Publication Date	Map Scale
Paulville-McPan-Starbuck complex, 1 to 8 percent slopes	141	55560	81872	2r61	id681	1993	1:24000
Paulville-McPan complex, 1 to 6 percent slopes	140	18540	81871	2r60	id681	1993	1:24000
Taunton-Paulville complex, 2 to 15 percent slopes	191	14545	81927	2r7t	id681	1993	1:24000
Catchell-Paulville complex, 2 to 10 percent slopes	29	5070	81962	2r8y	id681	1993	1:24000
Vickery-Paulville complex, 2 to 8 percent slopes	204	2635	81942	2r89	id681	1993	1:24000
Vining-Paulville complex, 1 to 6 percent slopes	208	2440	81946	2r8f	id681	1993	1:24000
Paulville loam, 0 to 2 percent slopes	139	2355	81869	2r5y	id681	1993	1:24000
Taunton-Bahem-Paulville complex, 4 to 8 percent slopes	187	2230	81922	2r7n	id681	1993	1:24000
Paulville-Purdam complex, 2 to 8 percent slopes	142	365	81873	2r62	id681	1993	1:24000
Paulville-McPan complex, 1 to 4 percent slopes	20	9010	80077	2pb4	id702	1999	1:24000
Taunton-Paulville complex, 1 to 4 percent slopes	40	1625	80097	2pbs	id702	1999	1:24000
Rock outcrop-Banbury-Paulville complex, 2 to 6 percent slopes	107	54209	80170	2pf4	id704	1992	1:24000
Paulville-Idow complex, 1 to 4 percent slopes	83	23555	80292	2pk2	id704	1992	1:24000
Paulville silt loam, 0 to 2 percent slopes	82	1052	80291	2pk1	id704	1992	1:24000
Paulville clay loam	40	4597	82374	2rq7	id707	1976	1:24000
Trevino-Paulville complex, 0 to 8 percent slopes	148	14734	82466	2rt6	id708	1987	1:24000
Taunton-Paulville complex, 2 to 15 percent slopes	77	5276	1532665	1nfvt	id780	1998	1:24000
Paulville-McPan-Starbuck complex, 1 to 8 percent slopes	53	4738	1531744	1ndx3	id780	1998	1:24000

Map of Series Extent

Approximate geographic distribution of the PAULVILLE soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry (updated 2024-10-30).