Official Series Description


Lab Data Summary

Aggregate lab data for the PATHEAD soil series. This aggregation is based on all pedons with a current taxon name of PATHEAD, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to PATHEAD were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

There are insufficient data to create the lab data summary figure.


Water Balance

Monthly water balance estimated using a leaky-bucket style model for the PATHEAD soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the PATHEAD series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the PATHEAD series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the PATHEAD series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Competing Series

Soil series competing with PATHEAD share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the PATHEAD series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the PATHEAD series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with PATHEAD, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

No block diagrams are available.

Map Units

Map units containing PATHEAD as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Pathead-Paunsaugunt-Gompers complex, 40 to 80 percent slopesOPF1421424403062mxbkut0131:24000
Pathead, very stony-Minnimaud-Saddlehorse, extremely bouldery association, 20 to 60 percent slopesDPG920314808961lpzvut0131:24000
Saddlehorse-Rock outcrop-Pathead complex, 40 to 80 percent slopes198547525037252nbzvut0131:24000
Tosca-Pathead extremely stony loams, 30 to 60 percent slopes, rubbly46_CC412027484552swx4ut0131:24000
Wiggler, dry-Pathead-Minnimaud complex, 30 to 80 percent slopes401273526778382s0l1ut0131:24000
Pathead-Averett-Modo association, 40 to 70 percent slopes, very stonyTPG76714260551jvxsut0131:24000
Saddlehorse-Rock outcrop-Pathead association, 50 to 80 percent slopes19842371505470jyzhut04719991:24000
Pathead-Curecanti family association7224430503767jx6kut61619831:24000
Pathead extremely bouldery fine sandy loam, 40 to 70 percent slopes7114457503766jx6jut61619831:24000
Curecanti family-Pathead complex238752503713jx4tut61619831:24000
Rabbitex-Pathead complex876163503783jx72ut61619831:24000
Guben-Pathead extremely stony loams463183503738jx5mut61619831:24000
Tosca-Minnimaud-Pathead complex, 12 to 50 percent slopes1712877189580921mr4ut62320111:24000
Pathead-Tosca complex, 40 to 70 percent slopes115242316135931r52dut62320111:24000
Pathead-Averett-Modo association, 40 to 70 percent slopes1147861885421218y1ut62320111:24000
Detra-Sheckle-Pathead complex, cool, 35 to 60 percent slopes20979025082292q7fhut6421:63360
Sheckle-Pathead-Detra, very deep complex, 8 to 35 percent slopes87311625082282q7fgut6421:63360
Paunsaugunt-Pathead-Osote complex, 15 to 35 percent slopes62252525082132q7dzut6421:63360
Pathead-Doney families complex, 5 to 40 percent slopes2510753331284930gvsut6451:24000
Porser, cool-Pathead-Wiggler families complex, 30 to 80 percent slopes20797732432892zsd7ut6451:24000
Pathead-Datino families complex, 30 to 70 percent slopes100504532432582zsccut6451:24000
Doney-Pathead families complex, 3 to 15 percent slopes25A2442331285030gvtut6451:24000
Pathead-Tosca families complex, 20 to 50 percent slopes100B45232432602zsc7ut6451:24000
Pathead-Kounter families, complex, 15 to 40 percent slopes, rubbly761487815229wc9qut6511:24000

Map of Series Extent

Approximate geographic distribution of the PATHEAD soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .