Soil Data Explorer - PANCHERI

Official Series Description

Lab Data Summary

Aggregate lab data for the PANCHERI soil series. This aggregation is based on all pedons with a current taxon name of PANCHERI, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to PANCHERI were used in the calculation. Source: KSSL snapshot (updated 2020-03-13). Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Pedons used in the lab summary:

MLRA	Lab ID	Pedon ID	Taxonname	CI	NSSL / NASIS Reports	Link To SoilWeb GMap
11	86P0917	86ID011001	Pancheri	6	Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties	43.3916664,-112.375
11	86P0918	86ID011002	Pancheri	8	Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties	43.3583336,-112.2833328
11	95P0161	94ID011003	Pancheri	8	Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties	43.4066658,-112.7188873
11	95P0163	94ID011005	Pancheri	8	Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties	43.5733337,-112.581665
11	40A1122	S1960ID019009	Pancheri	6	Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties	43.5360184,-112.4783478
11	13N17656	S2012ID019001	Pancheri	6	Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties	43.54169,-112.135

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the PANCHERI soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the PANCHERI series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot (updated 2024-10-24), parsed OSD records (updated 2024-10-23) and snapshot of SC database (updated 2024-10-23).

Select annual climate data summaries for the PANCHERI series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2024-10-23).

Geomorphic description summaries for the PANCHERI series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records (updated 2024-10-23).

Competing Series

Soil series competing with PANCHERI share the same family level classification in Soil Taxonomy. Source: parsed OSD records (updated 2024-10-23) and snapshot of the SC database (updated 2024-10-23).

Select annual climate data summaries for the PANCHERI series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2024-10-23).

Geomorphic description summaries for the PANCHERI series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records (updated 2024-10-23).

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with PANCHERI, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database (updated 2024-10-23).

Block Diagrams

Click a link below to display the diagram. Note that these diagrams may be from multiple survey areas.

1. ID-2011-06-01-03 | Bingham Area - 1973

   Representative pattern of soils in association 3 (Soil Survey of Bingham Area, Idaho; 1973).

2. UT-2012-03-22-05 | Rich County - July 1982

   Typical pattern of soils in general map unit 4 (Soil Survey of Rich County, UT; 1982).

3. UT-2012-05-10-04 | Rich County - July 1982

   Typical pattern of soils in general map unit 4 (Soil Survey of Rich County, Utah; July 1982).

Map Units

Map units containing PANCHERI as a major component. Limited to 250 records.

Map Unit Name	Symbol	Map Unit Area (ac)	Map Unit Key	National Map Unit Symbol	Soil Survey Area	Publication Date	Map Scale
Pancheri silt loam, 0 to 2 percent slopes	LDA	828	2434134	2mpxg	id761	2018	1:24000
Pancheri-Polatis complex, 2 to 12 percent slopes	87	35021	79109	2n9x	id763	1998	1:24000
Pancheri silt loam, 2 to 8 percent slopes	86	5245	79108	2n9w	id763	1998	1:24000
Pancheri silt loam, 2 to 4 percent slopes	96	27338	83945	2tbx	id765	1975	1:24000
Pancheri silt loam, 4 to 8 percent slopes	97	13248	83946	2tby	id765	1975	1:24000
Pancheri silt loam, 0 to 2 percent slopes	95	13069	83944	2tbw	id765	1975	1:24000
Pancheri-Rock outcrop complex	100	8595	83821	2t6x	id765	1975	1:24000
Pancheri silt loam, 2 to 30 percent slopes, stony	99	3990	83948	2tc0	id765	1975	1:24000
Pancheri silt loam, 8 to 12 percent slopes	98	826	83947	2tbz	id765	1975	1:24000
Pancheri silt loam, 0 to 2 percent slopes	LDA	95	2889451	2mpxg	id765	1975	1:24000
Pancheri silt loam, 2 to 4 percent slopes	23	67839	84169	2tl4	id769	1978	1:24000
Pancheri silt loam, 4 to 8 percent slopes	24	27986	84170	2tl5	id769	1978	1:24000
Pancheri silt loam, 0 to 2 percent slopes	22	25563	84168	2tl3	id769	1978	1:24000
Pancheri-Rock outcrop complex, 2 to 25 percent slopes	26	14835	84172	2tl7	id769	1978	1:24000
Pancheri silt loam, 8 to 15 percent slopes	25	1850	84171	2tl6	id769	1978	1:24000
Pancheri silt loam, 2 to 4 percent slopes	PhB	68865	79975	2p6v	id770	1968	1:24000
Pancheri silt loam, 0 to 2 percent slopes	PhA	34160	79974	2p6t	id770	1968	1:24000
Pancheri silt loam, 4 to 8 percent slopes	PhC	4866	79976	2p6w	id770	1968	1:24000
Pancheri silt loam, 8 to 12 percent slopes	PhD	282	79977	2p6x	id770	1968	1:24000
Pancheri silt loam, cool, 5 to 10 percent slopes	PAD	17295	503883	jxb9	ut604	1980	1:24000
Pancheri silt loam, cool, 1 to 5 percent slopes	PAC	12865	503882	jxb8	ut604	1980	1:24000
Pancheri silt loam, cool, 10 to 25 percent slopes	PAE	6680	503884	jxbb	ut604	1980	1:24000
Pancheri silt loam, cool, 10 to 20 percent slopes, eroded	PAE2	4280	503885	jxbc	ut604	1980	1:24000
Pancheri-Highams variant-Rock outcrop complex, 6 to 50 percent slopes	PBF	1800	503886	jxbd	ut604	1980	1:24000

Map of Series Extent

Approximate geographic distribution of the PANCHERI soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry (updated 2024-10-30).