Soil Data Explorer - NGEDEBUS

Official Series Description

Lab Data Summary

Aggregate lab data for the NGEDEBUS soil series. This aggregation is based on all pedons with a current taxon name of NGEDEBUS, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to NGEDEBUS were used in the calculation. Source: KSSL snapshot (updated 2020-03-18). Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Pedons used in the lab summary:

MLRA	Lab ID	Pedon ID	Taxonname	CI	NSSL / NASIS Reports	Link To SoilWeb GMap
n/a	07N0082	S06PW150001	Ngedebus	6	Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties	7.285,134.26575

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the NGEDEBUS soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

There are insufficient data to create the water balance bar figure.

There are insufficient data to create the water balance line figure.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the NGEDEBUS series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot (updated 2024-10-24), parsed OSD records (updated 2024-10-23) and snapshot of SC database (updated 2024-10-23).

Select annual climate data summaries for the NGEDEBUS series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2024-10-23).

There are insufficient data to create the annual climate figure.

Geomorphic description summaries for the NGEDEBUS series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records (updated 2024-10-23).

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

Competing Series

Soil series competing with NGEDEBUS share the same family level classification in Soil Taxonomy. Source: parsed OSD records (updated 2024-10-23) and snapshot of the SC database (updated 2024-10-23).

Select annual climate data summaries for the NGEDEBUS series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2024-10-23).

There are insufficient data to create the annual climate figure.

Geomorphic description summaries for the NGEDEBUS series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records (updated 2024-10-23).

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

Soil series sharing subgroup-level classification with NGEDEBUS, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database (updated 2024-10-23).

Block Diagrams

No block diagrams are available.

Map Units

Map units containing NGEDEBUS as a major component. Limited to 250 records.

Map Unit Name	Symbol	Map Unit Area (ac)	Map Unit Key	National Map Unit Symbol	Soil Survey Area	Publication Date	Map Scale
Urban land-Ngedebus complex, 0 to 5 percent slopes, MLRA 197	35	490	465422	2x1vy	as630	1982	1:24000
Ngedebus variant extremely cobbly sand, 0 to 5 percent slopes	12	207	465397	hm8t	as630	1982	1:24000
Ngedebus mucky sand	11	128	465396	hm8s	as630	1982	1:24000
Ngedebus loamy sand, 0 to 2 percent slopes	108	802	465438	hmb4	fm931	1980	1:10000
Ngedebus-Urban land complex, 0 to 2 percent slopes	109	104	465439	hmb5	fm931	1980	1:10000
Ngedebus variant very cobbly loamy sand, 0 to 2 percent slopes	110	45	465440	hmb6	fm931	1980	1:10000
Ngedebus-Rubble land association, 0 to 2 percent slopes	313	185	465460	hmbv	fm932	1980	1:10000
Ngedebus sand, 0 to 4 percent slopes	513	557	465505	hmd9	fm934	1980	1:10000
Ngedebus variant very gravelly loamy sand, 0 to 6 percent slopes	514	179	465506	hmdb	fm934	1980	1:10000
Ngedebus loamy sand, dark surface	4	960	465583	hmgt	mh936	1987	1:8000
Urban land-Ngedebus complex, 0 to 2 percent slopes, MLRA 196	7	949	465586	2w04z	mh936	1987	1:8000
Ngedebus loamy sand	3	758	465582	hmgs	mh936	1987	1:8000
Ngedebus very gravelly loamy sand	5	200	465584	hmgv	mh936	1987	1:8000
Ngedebus very gravelly loamy sand, dark surface	6	184	465585	hmgw	mh936	1987	1:8000
Ngedebus highly organic fine sandy loam, 0 to 3 percent slopes	628	3380	1859287	20dr0	pw935	2008	1:12000

Map of Series Extent

Approximate geographic distribution of the NGEDEBUS soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry (updated 2024-10-30).