Official Series Description


Lab Data Summary

Aggregate lab data for the NEWBERG soil series. This aggregation is based on all pedons with a current taxon name of NEWBERG, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to NEWBERG were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Click the image to view it full size.

Pedons used in the lab summary:

MLRALab IDPedon IDTaxonnameCINSSL / NASIS ReportsLink To SoilWeb GMap
215N0057S2014WA027409Newberg7Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties46.8464983,-123.2569783

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the NEWBERG soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the NEWBERG series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the NEWBERG series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the NEWBERG series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

Click the image to view it full size.

Click the image to view it full size.

Competing Series

Soil series competing with NEWBERG share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the NEWBERG series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the NEWBERG series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

Click the image to view it full size.

Click the image to view it full size.

Soil series sharing subgroup-level classification with NEWBERG, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

Click a link below to display the diagram. Note that these diagrams may be from multiple survey areas.

  1. OR-2012-05-10-16 | Jackson County Area - August 1993

    Geomorphlc surfaces in the valley of the Rogue River and their related soil series (Soil Survey of Jackson County Area, Oregon; August 1993).

  2. WA-2012-05-11-18 | Grays Harbor County Area, Pacific County, and Wahkiakum County - July 1986

    Pattern of soils and parent material in general soil map unit 3 (Soil Survey of Grays Harbor County Area, Pacific County, and Wahkiakum County, Washington; July 1986).

  3. WA-2012-05-11-29 | Lewis County Area - May 1987

    Pattern of soils and parent material in the Reed-Chehalis map unit (Soil Survey of Lewis County Area, Washington; May 1987).

Map Units

Map units containing NEWBERG as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Newberg loam, 0 to 3 percent slopes1274208852912vrbor00320041:24000
Newberg fine sandy loam, 0 to 3 percent slopes1251609853002vrmor00320041:24000
Newberg fine sandy loam, high precipitation, 0 to 3 percent slopes126120700459rhwgor00320041:24000
Newberg fine sandy loam573575469496hrk1or03319791:20000
Camas-Newberg complex153533469436hrh3or03319791:20000
Newberg fine sandy loam5320396238522xfor05319771:20000
Newberg loam5411106238622xgor05319771:20000
Newberg silt loam, 0 to 3 percent slopes2009A167727113632dgl8or07119671:24000
Newberg fine sandy loam, 0 to 3 percent slopes2007A111227113262dgl7or07119671:24000
Newberg fine sandy loam67260661704226gor61019821:20000
Newberg loam68227061705226hor61019821:20000
Camas-Newberg-Evans complex, 0 to 3 percent slopes23A9447469705hrrsor63219891:20000
Newberg fine sandy loam, 0 to 3 percent slopes133A1614469600hrndor63219891:20000
Newberg loam96885262771239wor63719811:20000
Newberg fine sandy loam95844962770239vor63719811:20000
Newberg-Urban land complex97147262772239xor63719811:20000
Newberg fine sandy loam73141856436824zdor63919831:20000
Newberg fine sandy loamNu62216414124r2or64319661:20000
Newberg silt loamNw48136414224r3or64319661:20000
Camas-Newberg complex, 0 to 3 percent slopes34A52456682527jnor64919941:24000
Newberg fine sandy loam, 0 to 3 percent slopes164A375066451274lor64919941:24000
Newberg loamy sand, 0 to 3 percent slopes165A135266452274mor64919941:24000
Newberg silt loam, 3 to 8 percent slopesNbB570720352dyqwa01119721:20000
Newberg silt loam, 0 to 3 percent slopesNbA490720342dypwa01119721:20000
Newberg fine sandy loam, 0 to 3 percent slopes1414565721802f3dwa01519941:24000
Newberg silt loam93596736932gp6wa62719791:24000
Newberg silt loamNg157813894351hmthwa63319691:24000
Newberg fine sandy loam1487763742972h9pwa64119801:24000
Newberg fine sandy loam7191924547412ndc6wa66719831:24000
Newberg loam7284324547422ndc7wa66719831:24000

Map of Series Extent

Approximate geographic distribution of the NEWBERG soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .