Official Series Description


Lab Data Summary

Aggregate lab data for the MOORHEAD soil series. This aggregation is based on all pedons with a current taxon name of MOORHEAD, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to MOORHEAD were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

There are insufficient data to create the lab data summary figure.


Water Balance

Monthly water balance estimated using a leaky-bucket style model for the MOORHEAD soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the MOORHEAD series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the MOORHEAD series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the MOORHEAD series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Competing Series

Soil series competing with MOORHEAD share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the MOORHEAD series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the MOORHEAD series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D mountains figure.

Click the image to view it full size.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with MOORHEAD, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

No block diagrams are available.

Map Units

Map units containing MOORHEAD as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Moorhead clay loam, 0 to 6 percent slopes18119013877471hl21mt64319671:20000
Echeta-Moorhead clay loams, 0 to 6 percent slopes2758413877591hl2fmt64319671:20000
Deekay-Moorhead loams, 0 to 6 percent slopes1322613877411hl1vmt64319671:20000
Jaywest-Moorhead loams, 0 to 6 percent slopes1672213877461hl20mt64319671:20000
Oshoto-Moorhead complex, 0 to 6 percent slopes23484780197v5vnwy01119781:24000
Deekay-Moorhead loams, 0 to 6 percent slopes132114313498172ztz9wy60519951:24000
Jaywest-Moorhead loams, 0 to 6 percent slopes167113573498592wlqlwy60519951:24000
Moorhead clay loam, 0 to 6 percent slopes18110473349877cr2cwy60519951:24000
Ironbutte-Deekay-Moorhead complex, 3 to 30 percent slopes24293283499422ztz8wy60519951:24000
Moorhead-Leiter clay loams, 6 to 15 percent slopes1848574349880cr2gwy60519951:24000
Moorhead-Leiter clay loams, 0 to 6 percent slopes18383153498792wls1wy60519951:24000
Urban land-Deekay-Moorhead complex, 0 to 6 percent slopes2303879349930cr42wy60519951:24000
Deekay-Moorhead loams, 6 to 15 percent slopes1332251349818cr0gwy60519951:24000
Moorhead loam, 0 to 6 percent slopes1822209349878cr2dwy60519951:24000
Oshoto-Moorhead loams, 0 to 6 percent slopes1892109349885cr2mwy60519951:24000
Urban land-Leiter-Moorhead complex, 3 to 10 percent slopes231779349931cr43wy60519951:24000
Jaywest-Moorhead loams, 0 to 6 percent slopes167157978175492wlqlwy70520031:24000
Moorhead-Leiter clay loams, 0 to 6 percent slopes183147868175602wls1wy70520031:24000
Deekay-Moorhead loams, 0 to 6 percent slopes132123338175212ztz9wy70520031:24000
Echeta-Moorhead clay loams, 0 to 6 percent slopes2758279817528wfpwwy70520031:24000
Moorhead-Leiter clay loams, 6 to 15 percent slopes1848260817562wfqzwy70520031:24000
Moorhead clay loam, 0 to 6 percent slopes1814469817557wfqtwy70520031:24000
Ironbutte-Deekay-Moorhead complex, 3 to 30 percent slopes242255132231142ztz8wy70520031:24000
Moorhead loam, 0 to 6 percent slopes1821468817558wfqvwy70520031:24000
Oshoto-Moorhead complex, 0 to 6 percent slopes3021365817568wfr5wy70520031:24000
Deekay-Moorhead loams, 6 to 15 percent slopes1331026817522wfppwy70520031:24000
Jaywest-Moorhead loams, 0 to 6 percent slopes75483913872932wlqlwy71920131:24000

Map of Series Extent

Approximate geographic distribution of the MOORHEAD soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .