Official Series Description


Lab Data Summary

Aggregate lab data for the MITIWANGA soil series. This aggregation is based on all pedons with a current taxon name of MITIWANGA, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to MITIWANGA were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Click the image to view it full size.

Pedons used in the lab summary:

MLRALab IDPedon IDTaxonnameCINSSL / NASIS ReportsLink To SoilWeb GMap
111D99P0008S1998IN045007Mitiwanga6Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties40.1697769,-87.390274
n/aPG-0151958-OH133-015Mitiwanga4Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Propertiesn/a
n/aCY-0011975-OH035-001Mitiwanga4Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Propertiesn/a
n/aER-0461991-OH043-046Mitiwanga4Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Propertiesn/a

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the MITIWANGA soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the MITIWANGA series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the MITIWANGA series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the MITIWANGA series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D mountains figure.

Click the image to view it full size.

Click the image to view it full size.

Competing Series

Soil series competing with MITIWANGA share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the MITIWANGA series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the MITIWANGA series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D mountains figure.

Click the image to view it full size.

Click the image to view it full size.

Soil series sharing subgroup-level classification with MITIWANGA, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

Click a link below to display the diagram. Note that these diagrams may be from multiple survey areas.

  1. OH-2012-02-16-18 | Cuyahoga County - December 1980

    Mahoning-Ellsworth association (Soil Survey of Cuyahoga County, Ohio; December 1980).

Map Units

Map units containing MITIWANGA as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Mitiwanga silt loam, 0 to 2 percent slopesMrcA36224254584d1in04519991:12000
Mitiwanga cobbly sandy loam, 0 to 3 percent slopes38A463718678768cdmi06319781:20000
Mitiwanga silt loam, 0 to 2 percent slopesMtA905298906b114oh00720011:12000
Mitiwanga silt loam, 2 to 6 percent slopesMtB840298907b115oh00720011:12000
Mitiwanga silt loam, 0 to 3 percent slopesMkA1151685845nf6oh03319751:15840
Mitiwanga silt loam, 0 to 2 percent slopesMtA77132872539mx7oh03519781:15840
Mitiwanga-Urban land compex, undulatingMxB73532872559mx9oh03519781:15840
Urban land-Mitiwanga complex, undulatingUnB63522872749mxxoh03519781:15840
Mitiwanga silt loam, 2 to 6 percent slopesMtB16482872549mx8oh03519781:15840
Mitiwanga silt loam, 0 to 2 percent slopesMxA14521721635s4noh04319981:12000
Mitiwanga silt loam, 2 to 6 percent slopesMxB2721721645s4poh04319981:12000
Mitiwanga silt loam, 2 to 6 percent slopesMrB6251679235mqwoh04919771:15840
Mitiwanga silt loam, 0 to 3 percent slopesMtA18422875759n7moh05519791:15840
Mitiwanga silt loam, moderately well drained variant, 6 to 12 percent slopesMvC2917214941vsc2oh05519791:15840
Mitiwanga silt loam, 2 to 6 percent slopesMnB1317214921vsc0oh05519791:15840
Mitiwanga silt loam, moderately well drained variant, 2 to 6 percent slopesMvB1017214931vsc1oh05519791:15840
Mitiwanga silt loam, 1 to 4 percent slopesMwB2021679885mszoh07719881:15840
Mitiwanga silt loam, 2 to 6 percent slopesMxB3316059801qx4toh07719881:15840
Mitiwanga silt loam, 0 to 2 percent slopesMtA3932868279mghoh08519761:15840
Mitiwanga silt loam, 0 to 2 percent slopesMtA51932877949ngpoh09319721:15840
Mitiwanga silt loam, 2 to 6 percent slopesMtB14442877959ngqoh09319721:15840
Mitiwanga-Urban land complex, gently slopingMxB6922877979ngsoh09319721:15840
Mitiwanga channery loam, 1 to 4 percent slopesMvB6432877969ngroh09319721:15840
Mitiwanga silt loam, 2 to 6 percent slopesMtB15762884789p5roh13319731:15840
Mitiwanga silt loam, moderately well drained variant, 2 to 6 percent slopesMvB9832884799p5soh13319731:15840
Mitiwanga silt loam, 0 to 2 percent slopesMtA7652884779p5qoh13319731:15840
Mitiwanga silt loam, moderately well drained variant, 6 to 12 percent slopesMvC2632884809p5toh13319731:15840
Mitiwanga silt loam, 2 to 6 percent slopesMtB238825381wpw6oh15319691:20000
Mitiwanga silt loam, 0 to 2 percent slopesMtA26652871089mrkoh15519861:15840
Mitiwanga silt loam, 2 to 6 percent slopesMtB25102871099mrloh15519861:15840
Mitiwanga silt loam, 1 to 4 percent slopesMtB18612872149mvzoh16919811:15840

Map of Series Extent

Approximate geographic distribution of the MITIWANGA soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .