Soil Data Explorer - MEDLIN

Official Series Description

Lab Data Summary

Aggregate lab data for the MEDLIN soil series. This aggregation is based on all pedons with a current taxon name of MEDLIN, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to MEDLIN were used in the calculation. Source: KSSL snapshot (updated 2020-03-18). Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

There are insufficient data to create the lab data summary figure.

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the MEDLIN soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the MEDLIN series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot (updated 2024-02-21), parsed OSD records (updated 2023-10-06) and snapshot of SC database (updated 2023-10-02).

Select annual climate data summaries for the MEDLIN series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2023-10-09).

Geomorphic description summaries for the MEDLIN series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records (updated 2023-10-04).

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D flats position figure.

Competing Series

Soil series competing with MEDLIN share the same family level classification in Soil Taxonomy. Source: parsed OSD records (updated 2023-10-06) and snapshot of the SC database (updated 2023-10-02).

Select annual climate data summaries for the MEDLIN series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2023-10-09).

Geomorphic description summaries for the MEDLIN series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records (updated 2023-10-04).

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with MEDLIN, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database (updated 2023-10-02).

Block Diagrams

Click a link below to display the diagram. Note that these diagrams may be from multiple survey areas.

1. TX-2012-03-20-25 | Comal and Hays Counties - June 1984

   Pattern of soils in the Krum-Medlin-Eckrant general soil map unit (Soil Survey of Comal and Hays Counties, TX; 1984).

Map Units

Map units containing MEDLIN as a major component. Limited to 250 records.

Map Unit Name	Symbol	Map Unit Area (ac)	Map Unit Key	National Map Unit Symbol	Soil Survey Area	Publication Date	Map Scale
Medlin clay, 3 to 5 percent slopes, eroded	50	4402	364501	d793	tx097	1973	1:24000
Medlin clay, 5 to 8 percent slopes	51	2932	364502	d794	tx097	1973	1:24000
Medlin clay, 1 to 3 percent slopes	49	129	364499	d791	tx097	1973	1:24000
Medlin-Sanger clay, 5 to 15 percent slopes	56	6522	365009	d7th	tx121	1975	1:24000
Medlin-Sanger stony clay, 5 to 15 percent slopes	57	5448	365010	2tc2s	tx121	1975	1:24000
Medlin clay, 5 to 15 percent slopes	MeE	727	368188	dc41	tx251	1981	1:20000
Medlin clay, 5 to 15 percent slopes	MeE	2449	372394	dhhq	tx439	1979	1:20000
Medlin-Sanger stony clay, 5 to 15 percent slopes	MdE	6478	373670	2tc2s	tx497	1984	1:20000
Medlin, warm-Eckrant association, 1 to 8 percent slopes	MEC	3762	393473	2ylvb	tx604	1981	1:20000
Medlin, warm-Eckrant association, 8 to 30 percent slopes	MED	2562	393474	2ysnh	tx604	1981	1:20000

Map of Series Extent

Approximate geographic distribution of the MEDLIN soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry (updated 2023-10-04).