Official Series Description


Lab Data Summary

Aggregate lab data for the LAHONTAN soil series. This aggregation is based on all pedons with a current taxon name of LAHONTAN, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to LAHONTAN were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Click the image to view it full size.

Pedons used in the lab summary:

MLRALab IDPedon IDTaxonnameCINSSL / NASIS ReportsLink To SoilWeb GMap
2740A32081959NV001005Lahontan5Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties39.3151111,-118.6502778

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the LAHONTAN soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the LAHONTAN series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the LAHONTAN series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the LAHONTAN series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D mountains figure.

Click the image to view it full size.

Click the image to view it full size.

Competing Series

Soil series competing with LAHONTAN share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the LAHONTAN series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the LAHONTAN series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

Click the image to view it full size.

Soil series sharing subgroup-level classification with LAHONTAN, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

Click a link below to display the diagram. Note that these diagrams may be from multiple survey areas.

  1. UT-2012-03-22-03 | East Millard Area - June 1959

    East-west cross section in the northern part of the East Millard Area, near Lynndyl, showing position of soils on the landscape. 1—Mellor, Harding, Woodrow, and Lahontan soils. 2—Preston and Lynndyl soils. 3—Woodrow and Oasis soils. 4—Poganeab soils. 5—Preston and Taylorsflat soils and sand dunes. 6—Taylorsflat and Naples soils. 7—Canyon Mountains (Soil Survey of East Millard Area, UT; 1959).

Map Units

Map units containing LAHONTAN as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Lahontan silty clay loam, strongly saline-alkaliLc369805872pvlid66019621:15840
Lahontan silty clay loam, moderately saline-alkaliLb272805862pvkid66019621:15840
Lahontan silty clay, strongly saline-alkaliLa86805852pvjid66019621:15840
Lahontan silty clay loam, 0 to 1 percent slopes122135214088831j91vnv60219851:24000
Lahontan clay, strongly saline, 0 to 1 percent slopes17512194643827plymnv60319711:24000
Lahontan clay, slightly saline, 0 to 1 percent slopes174748643826plylnv60319711:24000
Isolde-Lahontan complex, 0 to 15 percent slopes167401643871pm01nv60319711:24000
Lahontan variant silt loam, 0 to 2 percent slopesLhA199491538jhh2nv61119671:24000
Lahontan silt loam, moderately saline, 0 to 2 percent slopesLmA196491540jhh4nv61119671:24000
Lahontan variant silty clay, poorly drainedLn155491541jhh5nv61119671:24000
Lahontan silt loam, 2 to 4 percent slopesLhB63491539jhh3nv61119671:24000
Lahontan variant fine sandy loam, 2 to 4 percent slopesLaB49491537jhh1nv61119671:24000
Lahontan variant fine sandy loam, 0 to 2 percent slopesLaA31491536jhh0nv61119671:24000
Lahontan silty clay loam, slightly saline-alkaliLa2058495593jmpwnv62219721:24000
Lahontan clay loam, strongly saline-alkaliLb1897495594jmpxnv62219721:24000
Lahontan silty clay loam, strongly saline-alkali40115355473962hx63nv62519811:24000
Lahontan silty clay loam, sandy subsoil variantLC5085482403j5zdut63219701:20000
Lahontan silty clayLA3035482402j5zcut63219701:20000

Map of Series Extent

Approximate geographic distribution of the LAHONTAN soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .