Official Series Description


Lab Data Summary

Aggregate lab data for the KEEFA soil series. This aggregation is based on all pedons with a current taxon name of KEEFA, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to KEEFA were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Click the image to view it full size.

Pedons used in the lab summary:

MLRALab IDPedon IDTaxonnameCINSSL / NASIS ReportsLink To SoilWeb GMap
2992P057492NV023005KEEFA8Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties38.086113,-117.0083313
2973C0047S1973NV023003KEEFA6Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties37.8027306,-116.0030975
2974C0161S1974NV017007Keefa6Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties37.398056,-114.8883362

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the KEEFA soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the KEEFA series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the KEEFA series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the KEEFA series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D mountains figure.

Click the image to view it full size.

Click the image to view it full size.

Competing Series

Soil series competing with KEEFA share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the KEEFA series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the KEEFA series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

Click the image to view it full size.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with KEEFA, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

No block diagrams are available.

Map Units

Map units containing KEEFA as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Tybo-Keefa-Koyen association14704532478097j1hhnv75419921:24000
Keefa-Penoyer association14902954478104j1hqnv75419921:24000
Keefa, warm-Penoyer association14912243478105j1hrnv75419921:24000
Keefa-Lyx-Linoyer association3747246226340842rn3snv77619831:63360
Keefa-Koyen association174171084808072s21qnv78119941:24000
Keefa-Unsel association374083283481034j4k7nv78319911:24000
Keefa-Koyen association3741467084810352s21qnv78319911:24000
Unsel-Koyen-Keefa association313226360480911j4f8nv78319911:24000
Cirac-Keefa-Slaw association347522939480983j4hlnv78319911:24000
Keefa-Koyen-Keefa association374818386481041j4kgnv78319911:24000
Keefa-Stargo association374218328481036j4k9nv78319911:24000
Keefa-Garhill-Belted association374411422481038j4kcnv78319911:24000
Cirac-Keefa-Nyserva association34703496480979j4hgnv78319911:24000
Keefa-Hollywell association37451719481039j4kdnv78319911:24000
Keefa-Lyx-Linoyer association37471436481040j4kfnv78319911:24000
Belted-Keefa association9404221485175j8vtnv79619841:63360
Keefa-Itme association10003231484882j8kcnv79619841:63360

Map of Series Extent

Approximate geographic distribution of the KEEFA soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .