Soil Data Explorer - JODERO

Official Series Description

Lab Data Summary

Aggregate lab data for the JODERO soil series. This aggregation is based on all pedons with a current taxon name of JODERO, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to JODERO were used in the calculation. Source: KSSL snapshot (updated 2020-03-18). Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Pedons used in the lab summary:

MLRA	Lab ID	Pedon ID	Taxonname	CI	NSSL / NASIS Reports	Link To SoilWeb GMap
47	09N1049	S2009UT017001	Jodero	8	Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties	37.8698883,-112.4346085

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the JODERO soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the JODERO series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot (updated 2024-10-24), parsed OSD records (updated 2024-10-23) and snapshot of SC database (updated 2024-10-23).

Select annual climate data summaries for the JODERO series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2024-10-23).

Geomorphic description summaries for the JODERO series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records (updated 2024-10-23).

Competing Series

Soil series competing with JODERO share the same family level classification in Soil Taxonomy. Source: parsed OSD records (updated 2024-10-23) and snapshot of the SC database (updated 2024-10-23).

Select annual climate data summaries for the JODERO series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2024-10-23).

Geomorphic description summaries for the JODERO series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records (updated 2024-10-23).

Soil series sharing subgroup-level classification with JODERO, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database (updated 2024-10-23).

Block Diagrams

No block diagrams are available.

Map Units

Map units containing JODERO as a major component. Limited to 250 records.

Map Unit Name	Symbol	Map Unit Area (ac)	Map Unit Key	National Map Unit Symbol	Soil Survey Area	Publication Date	Map Scale
Jodero family, 0 to 15 percent slopes	105	661	496562	jnq4	co627	1980	1:24000
Boyle-Jodero families association, 0 to 15 percent slopes	96	387	496569	jnqc	co627	1980	1:24000
Jodero loam	Jo	2199	498659	jqws	co631	1972	1:24000
Jodero-Lolo, wet complex, 0 to 6 percent slopes	40	5040	498473	jqps	co633	1981	1:24000
Jodero loam, 0 to 3 percent slopes	39	1991	498471	jqpq	co633	1981	1:24000
Boyle-Jodero families association, 0 to 15 percent slopes	520M	4679	509853	k3jw	co636	2011	1:24000
Jodero family, 0 to 15 percent slopes	102F	2628	509808	k3hf	co636	2011	1:24000
Jodero sandy loam, 2 to 5 percent slopes	46	3700	498312	jqjl	co637	1986	1:24000
Jodero variant clay loam, 1 to 3 percent slopes	47	281	498313	jqjm	co637	1986	1:24000
Jodero loam, 1 to 12 percent slopes	68	737	498011	jq6w	co655	1984	1:24000
Jodero loam, 2 to 12 percent slopes, gullied	148	7172	2453688	2nc87	co664	1987	1:24000
Jodero-Empedrado families complex, 2 to 20 percent slopes	23	7627	510587	k49k	co676	1983	1:24000
Dacore-Jodero association, 4 to 15 percent slopes	119	2444	2422685	2mb04	ut628		1:24000
Jodero loam, moist, 0 to 2 percent slopes	154	1199	483622	j77q	ut628		1:24000
Dacore-Jodero association, 2 to 8 percent slopes	118	641	483469	j72s	ut628		1:24000
Dacore-Jodero complex, 0 to 2 percent slopes	120	369	483468	j72r	ut628		1:24000
Dacore-Jodero association, 4 to 15 percent slopes	119	1283	2504527	2r80r	ut629		1:24000
Jodero loam, 0 to 2 percent slopes	154	1201	2504541	2r81d	ut629		1:24000
Dacore-Jodero association, 2 to 8 percent slopes	118	403	2504560	2r80q	ut629		1:24000
Dacore-Jodero complex, 0 to 2 percent slopes	120	322	2958660	j72r	ut629		1:24000
Jodero loam, 1 to 2 percent slopes	72	4789	504469	jxy6	ut636	1984	1:24000
Jodero loam, moist, 2 to 8 percent slopes	73	622	504470	jxy7	ut636	1984	1:24000
Jodero family, 2 to 8 percent slopes	401A	522	512473	k68d	ut646		1:24000

Map of Series Extent

Approximate geographic distribution of the JODERO soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry (updated 2024-10-30).