Official Series Description


Lab Data Summary

Aggregate lab data for the HOOSIMBIM soil series. This aggregation is based on all pedons with a current taxon name of HOOSIMBIM, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to HOOSIMBIM were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Click the image to view it full size.

Pedons used in the lab summary:

MLRALab IDPedon IDTaxonnameCINSSL / NASIS ReportsLink To SoilWeb GMap
598P032497CA089002HOOSIMBIM5Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties41.0097237,-122.1374969

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the HOOSIMBIM soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the HOOSIMBIM series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the HOOSIMBIM series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the HOOSIMBIM series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Competing Series

Soil series competing with HOOSIMBIM share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the HOOSIMBIM series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the HOOSIMBIM series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with HOOSIMBIM, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

No block diagrams are available.

Map Units

Map units containing HOOSIMBIM as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
MARPA-HOOSIMBIM-BAMTUSH COMPLEX, 50 TO 75 PERCENT SLOPES17112591466072hmzlca60619901:24000
INDLETON-CARIS-HOOSIMBIM COMPLEX, 50 TO 75 PERCENT SLOPES1627404466065hmzcca60619901:24000
HOOSIMBIM-BAMTUSH-MARPA COMPLEX, 30 TO 50 PERCENT SLOPES1573832466060hmz6ca60619901:24000
HOLKAT-HOOSIMBIM COMPLEX, 50 TO 75 PERCENT SLOPES1543315466057hmz3ca60619901:24000
CARIS-INDLETON-HOOSIMBIM COMPLEX, 50 TO 75 PERCENT SLOPES1222453466021hmxyca60619901:24000
HOOSIMBIM-ETSEL COMPLEX, 30 TO 50 PERCENT SLOPES1581310466061hmz7ca60619901:24000
HOOSIMBIM-GOULDING COMPLEX, 50 TO 75 PERCENT SLOPES1591131466062hmz8ca60619901:24000
HOOSIMBIM GRAVELLY LOAM, 30 TO 50 PERCENT SLOPES156847466059hmz5ca60619901:24000
HOLKAT-HOOSIMBIM COMPLEX, 30 TO 50 PERCENT SLOPES153581466056hmz2ca60619901:24000
VANVOR-HOOSIMBIM COMPLEX, 50 TO 75 PERCENT SLOPES206422466108hn0rca60619901:24000
MARPA-HOOSIMBIM COMPLEX, 30 TO 50 PERCENT SLOPES170384466071hmzkca60619901:24000
VANVOR-HOOSIMBIM COMPLEX, 30 TO 50 PERCENT SLOPES205174466107hn0qca60619901:24000
Marpa-Hoosimbim-Bamtush complex, 50 to 75 percent slopes171tw1989186880720qn3ca70719831:24000
Indleton-Caris-Hoosimbim complex, 50 to 75 percent slopes162tw1039186879220qmmca70719831:24000
Caris-Indleton-Hoosimbim complex, 50 to 75 percent slopes122tw992186874120qkzca70719831:24000
Hoosimbim-Goulding complex, 50 to 75 percent slopes159tw830186879020qmkca70719831:24000
Holkat-Hoosimbim complex, 50 to 75 percent slopes154tw750186878220qm9ca70719831:24000
Hoosimbim gravelly loam, 30 to 50 percent slopes156tw637186878420qmcca70719831:24000
Hoosimbim-Bamtush-Marpa complex, 30 to 50 percent slopes157tw338186878620qmfca70719831:24000
Holkat-Hoosimbim complex, 30 to 50 percent slopes153tw250186877020qlxca70719831:24000
Vanvor-Hoosimbim complex, 50 to 75 percent slopes206tw47186884520qpbca70719831:24000
Hoosimbim-Etsel complex, 30 to 50 percent slopes158tw39186878820qmhca70719831:24000

Map of Series Extent

Approximate geographic distribution of the HOOSIMBIM soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .