Soil Data Explorer - HENKIN

Official Series Description

Lab Data Summary

Aggregate lab data for the HENKIN soil series. This aggregation is based on all pedons with a current taxon name of HENKIN, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to HENKIN were used in the calculation. Source: KSSL snapshot (updated 2020-03-13). Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Pedons used in the lab summary:

MLRA	Lab ID	Pedon ID	Taxonname	CI	NSSL / NASIS Reports	Link To SoilWeb GMap
102C	40A2446	S1957SD099001	Henkin	5	Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties	43.6333351,-96.7083359
102C	40A2447	S1957SD099010	HENKIN	6	Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties	43.8041649,-96.7333298

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the HENKIN soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the HENKIN series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot (updated 2024-10-24), parsed OSD records (updated 2024-10-23) and snapshot of SC database (updated 2024-10-23).

Select annual climate data summaries for the HENKIN series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2024-10-23).

Geomorphic description summaries for the HENKIN series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records (updated 2024-10-23).

There are insufficient data to create the 3D mountains figure.

Competing Series

Soil series competing with HENKIN share the same family level classification in Soil Taxonomy. Source: parsed OSD records (updated 2024-10-23) and snapshot of the SC database (updated 2024-10-23).

Select annual climate data summaries for the HENKIN series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2024-10-23).

Geomorphic description summaries for the HENKIN series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records (updated 2024-10-23).

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with HENKIN, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database (updated 2024-10-23).

Block Diagrams

No block diagrams are available.

Map Units

Map units containing HENKIN as a major component. Limited to 250 records.

Map Unit Name	Symbol	Map Unit Area (ac)	Map Unit Key	National Map Unit Symbol	Soil Survey Area	Publication Date	Map Scale
Henkin loam, 2 to 6 percent slopes	HeB	133	355032	cxfn	sd023	1980	1:20000
Henkin-Blendon fine sandy loams, 2 to 6 percent slopes	HkB	119	417737	g0pd	sd025	1992	1:20000
Henkin-Blendon fine sandy loams, 2 to 6 percent slopes	HbB	1818	354899	cx9c	sd043	1979	1:20000
Henkin-Blendon fine sandy loams, 0 to 2 percent slopes	HbA	1547	354898	cx9b	sd043	1979	1:20000
Henkin-Blendon fine sandy loams, 0 to 4 percent slopes	HaA	529	353804	cw51	sd069	1992	1:20000
Henkin loam, 1 to 5 percent slopes	HeB	1653	356438	cyx0	sd073	1987	1:20000
Henkin variant sandy loam, 6 to 40 percent slopes	HfD	753	356439	cyx1	sd073	1987	1:20000
Henkin-Blendon fine sandy loams, 2 to 6 percent slopes	HbB	114	417484	g0f7	sd077	1992	1:20000
Henkin loam, 3 to 9 percent slopes	HeB	1400	416502	fzdk	sd079	1967	1:20000
Henkin loam, 0 to 3 percent slopes	HeA	77	416501	fzdj	sd079	1967	1:20000
Blendon-Henkin fine sandy loams, 2 to 6 percent slopes	BhB	1121	446004	gz37	sd099	1995	1:24000
Corson-Henkin complex, 6 to 9 percent slopes	CpC	538	446013	gz3j	sd099	1995	1:24000
Henkin-Blendon fine sandy loams, 0 to 2 percent slopes	HsA	2276	356653	cz3y	sd115	1997	1:24000
Henkin-Blendon fine sandy loams, 2 to 6 percent slopes	HsB	857	356654	cz3z	sd115	1997	1:24000
Blendon-Henkin fine sandy loams, 2 to 6 percent slopes	BmB	773	418208	g15l	sd125	1980	1:20000
Henkin fine sandy loam, 2 to 6 percent slopes	HmB	6229	417980	g0y7	sd602	1975	1:20000
Henkin fine sandy loam, 0 to 2 percent slopes	HmA	1145	417979	g0y6	sd602	1975	1:20000

Map of Series Extent

Approximate geographic distribution of the HENKIN soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry (updated 2024-10-30).