Official Series Description


Lab Data Summary

Aggregate lab data for the HEIZER soil series. This aggregation is based on all pedons with a current taxon name of HEIZER, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to HEIZER were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Click the image to view it full size.

Pedons used in the lab summary:

MLRALab IDPedon IDTaxonnameCINSSL / NASIS ReportsLink To SoilWeb GMap
7306N0845S2006KS089700heizer7Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties39.7850838,-98.1052246

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the HEIZER soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the HEIZER series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the HEIZER series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the HEIZER series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Competing Series

Soil series competing with HEIZER share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the HEIZER series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

There are insufficient data to create the annual climate figure.

Geomorphic description summaries for the HEIZER series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with HEIZER, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

Click a link below to display the diagram. Note that these diagrams may be from multiple survey areas.

  1. KS-2012-01-23-41 | Jewell County - May 1984

    Typical pattern of soils and underlying material in the Brownell-Wakeen-Bogue association (Soil Survey of Jewell County, Kansas; 1984).

  2. KS-2012-01-26-16 | Trego County - February 1990

    Pattern of soils and parent material in the Armo-Heizer-Brownell association (Soil Survey of Trego County, Kansas; 1990).

Map Units

Map units containing HEIZER as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Heizer-Armo complex, 8 to 25 percent slopes26581643311501392twfwks05119701:24000
Heizer-Brownell complex, 5 to 30 percent slopes2660530611501402twfxks05119701:24000
Brownell-Heizer gravelly loams, 3 to 30 percent slopes25472242113818392twfjks08919811:24000
Heizer-Wakeen complex, 3 to 40 percent slopes26622701411520772vvmsks13519711:24000
Rock land-Heizer complex, 3 to 40 percent slopes2796171211520952zwk1ks13519711:24000
Heizer-Brownell complex, 5 to 30 percent slopes266017711520762twfxks13519711:24000
Heizer-Brownell complex, 5 to 30 percent slopes26605573411510152twfxks14119711:24000
Brownell-Heizer gravelly loams, 3 to 30 percent slopes2547314711508982twfjks14719851:24000
Heizer-Brownell complex, 5 to 30 percent slopes26604983811502452twfxks16319801:24000
Heizer-Armo complex, 8 to 25 percent slopes26587811502442twfwks16319801:24000
Heizer-Brownell complex, 5 to 30 percent slopes266070711509642twfxks16719801:24000
Heizer-Brownell complex, 5 to 30 percent slopes2660799211511152twfxks18319741:24000
Brownell-Heizer gravelly loams, 3 to 30 percent slopes254743811511062twfjks18319741:24000
Heizer-Brownell complex, 5 to 30 percent slopes26602058311508552twfxks19519861:24000
Heizer-Armo complex, 8 to 25 percent slopes2658711508542twfwks19519861:24000

Map of Series Extent

Approximate geographic distribution of the HEIZER soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .