Soil Data Explorer - GALLIPOLIS

Official Series Description

Lab Data Summary

Aggregate lab data for the GALLIPOLIS soil series. This aggregation is based on all pedons with a current taxon name of GALLIPOLIS, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to GALLIPOLIS were used in the calculation. Source: KSSL snapshot (updated 2020-03-18). Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

There are insufficient data to create the lab data summary figure.

Pedons used in the lab summary:

MLRA	Lab ID	Pedon ID	Taxonname	CI	NSSL / NASIS Reports	Link To SoilWeb GMap
n/a	GL-006	1987-OH053-006	Gallipolis	4	Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties	n/a

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the GALLIPOLIS soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the GALLIPOLIS series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot (updated 2024-02-21), parsed OSD records (updated 2023-10-06) and snapshot of SC database (updated 2023-10-02).

Select annual climate data summaries for the GALLIPOLIS series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2023-10-09).

Geomorphic description summaries for the GALLIPOLIS series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records (updated 2023-10-04).

There are insufficient data to create the 3D mountains figure.

Competing Series

Soil series competing with GALLIPOLIS share the same family level classification in Soil Taxonomy. Source: parsed OSD records (updated 2023-10-06) and snapshot of the SC database (updated 2023-10-02).

Select annual climate data summaries for the GALLIPOLIS series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2023-10-09).

Geomorphic description summaries for the GALLIPOLIS series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records (updated 2023-10-04).

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with GALLIPOLIS, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database (updated 2023-10-02).

Block Diagrams

No block diagrams are available.

Map Units

Map units containing GALLIPOLIS as a major component. Limited to 250 records.

Map Unit Name	Symbol	Map Unit Area (ac)	Map Unit Key	National Map Unit Symbol	Soil Survey Area	Publication Date	Map Scale
Gallipolis silt loam, 2 to 6 percent slopes	GyB	2	1008376	12v98	oh009	1981	1:15840
Gallipolis silt loam, 1 to 6 percent slopes	GbB	4105	536807	l0lc	oh053	1988	1:15840
Gallipolis silt loam, 6 to 15 percent slopes	GbC	544	536808	l0ld	oh053	1988	1:15840
Gallipolis silt loam, 2 to 6 percent slopes	GfB	86	1460311	1l0kt	oh053	1988	1:15840
Gallipolis silt loam, 0 to 2 percent slopes	GbA	1493	537157	l0yn	oh105	1991	1:15840
Gallipolis silt loam, 2 to 6 percent slopes	GbB	1192	537158	l0yp	oh105	1991	1:15840
Gallipolis silt loam, 0 to 3 percent slopes, rarely flooded	GgA	2137	1384216	1hgd4	wv600	2005	1:24000
Gallipolis silt loam, 0 to 3 percent slopes	GfA	906	1384162	1hgbd	wv600	2005	1:24000
Gallipolis-Urban land complex, 0 to 8 percent slopes	GhB	815	1384234	1hgdq	wv600	2005	1:24000
Ashton-Gallipolis-Urban land complex, 0 to 8 percent slopes, rarely flooded	AuB	661	1384232	1hgdn	wv600	2005	1:24000
Gallipolis silt loam, 3 to 8 percent slopes	GfB	394	1384163	1hgbf	wv600	2005	1:24000
Gallipolis silt loam, 3 to 8 percent slopes, rarely flooded	GgB	335	1384217	1hgd5	wv600	2005	1:24000

Map of Series Extent

Approximate geographic distribution of the GALLIPOLIS soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry (updated 2023-10-04).