Official Series Description


Lab Data Summary

Aggregate lab data for the FUGHES soil series. This aggregation is based on all pedons with a current taxon name of FUGHES, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to FUGHES were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Click the image to view it full size.

Pedons used in the lab summary:

MLRALab IDPedon IDTaxonnameCINSSL / NASIS ReportsLink To SoilWeb GMap
n/a40A1142S1977UT021009Fughes6Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Propertiesn/a

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the FUGHES soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the FUGHES series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the FUGHES series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the FUGHES series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Competing Series

Soil series competing with FUGHES share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the FUGHES series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the FUGHES series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Soil series sharing subgroup-level classification with FUGHES, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

No block diagrams are available.

Map Units

Map units containing FUGHES as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Fughes sandy clay loam, 3 to 15 percent slopes193162496453jnlmco62719801:24000
Fughes family, 5 to 25 percent slopes505M491509837k3jcco63620111:24000
Herm-Fughes complex, 10 to 20 percent slopes, extremely bouldery98123106843jpg8co6481:24000
Fughes-Godding families complex, 5 to 40 percent slopes333B2953214149371jhc4co6541:24000
Herm-Fughes families complex, 5 to 40 percent slopes, eroded430B344214150241jhfyco6541:24000
Curecanti-Fughes complex, 12 to 25 percent slopes223163497961jq58co65519841:24000
Curecanti-Fughes complex, 6 to 12 percent slopes211058497960jq57co65519841:24000
Fughes stony loam, 3 to 12 percent slopes48766497989jq65co65519841:24000
Herm-Fughes-Kolob family complex, 25 to 40 percent slopes15834861509517k361co66019941:24000
Fughes-Fughes, cool-Fughes, very stony, cool complex, 5 to 25 percent slopesGR61717130848322ypr6co66019941:24000
Kolob family, dry-Fughes complex, 5 to 45 percent slopes, extremely stony16512214509527k36cco66019941:24000
Fughes-Fughes, very stony complex, cool, 5 to 25 percent slopesGR5900630848312ypr5co66019941:24000
Fughes-Fughes, very stony complex, cool, 25 to 65 percent slopesGR7475930848332ypr8co66019941:24000
Fughes-Kolob family, warm complex, 5 to 45 percent slopes1463590509503k35lco66019941:24000
Fughes clay loam, 3 to 9 percent slopes, stony14471509500k35hco66019941:24000
Fughes clay loam, 2 to 6 percent slopes14313509498k35fco66019941:24000
Fughes-Hesperus complex, 3 to 12 percent slopes1459509502k35kco66019941:24000
Fughes-Herm complex, 1 to 35 percent slopes401110576432wqy8co67119971:24000
Fughes loam, 1 to 12 percent slopes39995576382wqy7co67119971:24000
Fughes-Sheek complex, 15 to 30 percent slopes41400576442wr82co67119971:24000
Granath-Fughes complex, 0 to 15 percent slopes46334576501xzpco67119971:24000
Granath-Fughes complex, 0 to 15 percent slopes51120710507191k0s0co67220031:24000
Fughes-Sheek complex, 15 to 30 percent slopes801134945072572wr82co67220031:24000
Fughes loam, 1 to 12 percent slopes1358547376802wqy7co67220031:24000
Fughes-Herm complex, 1 to 35 percent slopes5830347376932wqy8co67220031:24000
Shawa-Fughes complex, 30 to 60 percent slopes8062969507261k0v8co67220031:24000
Shawa-Fughes complex, 15 to 30 percent slopes8051210507260k0v7co67220031:24000
Fughes-Herm complex, 25 to 45 percent slopes59588737694srmlco67220031:24000
Fughes silty clay loam, 5 to 30 percent slopes813497507265k0vdco67220031:24000
Herm-Fughes-Godding complex, 5 to 45 percent slopes122600505174jynyco67419981:24000
Fughes-Fughes, cool-Fughes, very stony, cool complex, 5 to 25 percent slopesGR61205630848382ypr6co67919761:24000
Fughes-Curecanti stony loams, 10 to 40 percent slopes4110039496619jnrzco67919761:24000
Fughes loam, 25 to 65 percent slopes398190496616jnrwco67919761:24000
Fughes loam, 5 to 15 percent slopes373864496614jnrtco67919761:24000
Fughes-Fughes, very stony complex, cool, 5 to 25 percent slopesGR5335030848372ypr5co67919761:24000
Fughes-Fughes, very stony complex, cool, 25 to 65 percent slopesGR7145631705332ypr8co67919761:24000
Fughes clay loam, 2 to 6 percent slopes374724496698jnvjco68219861:24000
Fughes-Hesperus complex, 3 to 12 percent slopes392957496700jnvlco68219861:24000
Fughes clay loam, 3 to 9 percent slopes, stony381582496699jnvkco68219861:24000
Herm-Fughes complex, 10 to 20 percent slopes, extremely bouldery987027497279jpg8co68619921:31680
Fughes-Crooked Creek-Fentonlake families association, 0 to 15 percent slopes5222029343582whdvnm6781:24000
Fughes loam, 4 to 10 percent slopes313158553511vljut63319831:24000
Fughes-Sheckle loams, 4 to 25 percent slopes38014918483908j7jyut63419971:24000
Fughes silty clay loam, 0 to 4 percent slopes522059504447jxxhut63619841:24000
Sirref-Fughes-Harpole families complex, 3 to 25 percent slopesmt456630331483830hl1ut6451:24000
Fughes-Detra families complex, 3 to 20 percent slopesmt22343132026732zbv7ut6451:24000
Fughes family, 3 to 15 percent slopes243699512382k65gut6461:24000
Fughes, extremely stony-Blaincreek, very stony families, complex, 25 to 60 percent slopes1453447791185vk93ut6511:24000

Map of Series Extent

Approximate geographic distribution of the FUGHES soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .