Official Series Description


Lab Data Summary

Aggregate lab data for the FLUVAQUENTIC ENDOAQUOLLS soil series. This aggregation is based on all pedons with a current taxon name of FLUVAQUENTIC ENDOAQUOLLS, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to FLUVAQUENTIC ENDOAQUOLLS were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

There are insufficient data to create the lab data summary figure.


Water Balance

Monthly water balance estimated using a leaky-bucket style model for the FLUVAQUENTIC ENDOAQUOLLS soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

There are insufficient data to create the water balance bar figure.



There are insufficient data to create the water balance line figure.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the FLUVAQUENTIC ENDOAQUOLLS series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

There are insufficient data to create the sibling sketch figure.

Select annual climate data summaries for the FLUVAQUENTIC ENDOAQUOLLS series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

There are insufficient data to create the annual climate figure.

Geomorphic description summaries for the FLUVAQUENTIC ENDOAQUOLLS series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Competing Series

Soil series competing with FLUVAQUENTIC ENDOAQUOLLS share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

There are insufficient data to create the competing sketch figure.

Select annual climate data summaries for the FLUVAQUENTIC ENDOAQUOLLS series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

There are insufficient data to create the annual climate figure.

Geomorphic description summaries for the FLUVAQUENTIC ENDOAQUOLLS series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with FLUVAQUENTIC ENDOAQUOLLS, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

This figure is not available.

Block Diagrams

No block diagrams are available.

Map Units

Map units containing FLUVAQUENTIC ENDOAQUOLLS as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Fluvaquentic Endoaquolls, 0 to 2 percent slopes103278656845q1hkca60020171:24000
Fluvaquentic Endoaquolls-Xerofluvents complex, 0 to 4 percent slopes194bo23922291452dtlxca73219981:24000
Torrifluvents-Fluvaquentic Endoaquolls complex, cool, 0 to 2 percent slopes329bo8622291802dtn1ca73219981:24000
Torrifluvents-Fluvaquentic Endoaquolls complex, 0 to 2 percent slopes32814230488290jd39ca80219961:24000
Torrifluvents-Fluvaquentic Endoaquolls complex, cool, 0 to 2 percent slopes3291421488291jd3bca80219961:24000
Fluvaquentic Endoaquolls-Xerofluvents complex, 0 to 4 percent slopes1941062488087jcwrca80219961:24000
Fluvaquentic Endoaquolls-Slickens complex, 0 to 2 percent slopes, severely impacted104A103715454955tgmt61620031:24000
Slickens-Fluvaquentic Endoaquolls complex, 0 to 2 percent slopes, severely impacted105A49315455055thmt61620031:24000
Fluvaquentic Endoaquolls-Slickens complex, 0 to 2 percent slopes, severely impacted104A2751459664wwlmt64419951:24000
Slickens-Fluvaquentic Endoaquolls complex, 0 to 2 percent slopes, severely impacted105A691459994wxnmt64419951:24000
Fluvaquentic Endoaquolls, 0 to 2 percent slopes681881764242kj9wa63920031:24000
Fluvaquentic Endoaquolls, 0 to 2 percent slopes192611016979241tztrwa67620141:12000
Fluvaquentic Endoaquolls-Whetsoon complex, 0 to 3 percent slopes15653991045113hrbwy03119981:24000
Fluvaquentic Endoaquolls, 0 to 4 percent slopes147115116697881t1k4wy60920061:24000
Fluvaquentic Endoaquolls, 0 to 4 percent slopes2884316502424jvt7wy62519851:24000

Map of Series Extent

Approximate geographic distribution of the FLUVAQUENTIC ENDOAQUOLLS soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .