Official Series Description


Lab Data Summary

Aggregate lab data for the EVADALE soil series. This aggregation is based on all pedons with a current taxon name of EVADALE, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to EVADALE were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Click the image to view it full size.

Pedons used in the lab summary:

MLRALab IDPedon IDTaxonnameCINSSL / NASIS ReportsLink To SoilWeb GMap
150A12N8317S12TX2911022Evadale7Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties30.2830583,-94.6753083
152BS00TX351003S00TX351003Evadale6Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties30.3353333,-93.817
152BS94TX241001S94TX241001Evadale4Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties30.3647222,-94.0336111
152BS96TX199005S96TX199005Evadale5Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties30.1825,-94.2955278

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the EVADALE soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the EVADALE series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the EVADALE series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the EVADALE series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

Click the image to view it full size.

Competing Series

Soil series competing with EVADALE share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the EVADALE series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the EVADALE series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

Click the image to view it full size.

Click the image to view it full size.

Soil series sharing subgroup-level classification with EVADALE, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

No block diagrams are available.

Map Units

Map units containing EVADALE as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Evadale-Aldine complex, 0 to 1 percent slopesEvdA32092760716f745tx07119691:24000
Evadale silt loam, 0 to 1 percent slopesEvaA262760715f743tx07119691:24000
Evadale-Aldine complex, 0 to 1 percent slopesEvdA290182760770f745tx19919981:24000
Evadale-Gist complex, 0 to 1 percent slopesEvgA151082760769f744tx19919981:24000
Evadale silt loam, 0 to 1 percent slopesEvaA60622760768f743tx19919981:24000
Evadale-Aldine complex, 0 to 1 percent slopesEvdA342402888270f745tx29119861:24000
Evadale-Gist complex, 0 to 1 percent slopesEvgA231832888269f744tx29119861:24000
Evadale silt loam, 0 to 1 percent slopesEvaA101742888268f743tx29119861:24000
Evadale silt loam, 0 to 1 percent slopesEvaA4532888382f743tx45720071:24000
Evadale-Gist complex, 0 to 1 percent slopesEvgA518502888394f744tx61119801:20000
Evadale silt loam, 0 to 1 percent slopesEvaA255352888393f743tx61119801:20000
Evadale-Aldine complex, 0 to 1 percent slopesEvdA192732888395f745tx61119801:20000
Evadale-Gist complex, 0 to 1 percent slopesEvgA502888435f744tx61719831:24000
Evadale-Gist complex, 0 to 1 percent slopesEvgA326412888507f744tx62319961:24000
Evadale-Aldine complex, 0 to 1 percent slopesEvdA202012888508f745tx62319961:24000
Evadale silt loam, 0 to 1 percent slopesEvaA92412888506f743tx62319961:24000

Map of Series Extent

Approximate geographic distribution of the EVADALE soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .