Official Series Description


Lab Data Summary

Aggregate lab data for the E29-BOREAL TAIGA-SILTY FROZEN TERRACES soil series. This aggregation is based on all pedons with a current taxon name of E29-BOREAL TAIGA-SILTY FROZEN TERRACES, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to E29-BOREAL TAIGA-SILTY FROZEN TERRACES were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

There are insufficient data to create the lab data summary figure.


Water Balance

Monthly water balance estimated using a leaky-bucket style model for the E29-BOREAL TAIGA-SILTY FROZEN TERRACES soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

There are insufficient data to create the water balance bar figure.



There are insufficient data to create the water balance line figure.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the E29-BOREAL TAIGA-SILTY FROZEN TERRACES series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

There are insufficient data to create the sibling sketch figure.

Select annual climate data summaries for the E29-BOREAL TAIGA-SILTY FROZEN TERRACES series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

There are insufficient data to create the annual climate figure.

Geomorphic description summaries for the E29-BOREAL TAIGA-SILTY FROZEN TERRACES series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Competing Series

Soil series competing with E29-BOREAL TAIGA-SILTY FROZEN TERRACES share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

There are insufficient data to create the competing sketch figure.

Select annual climate data summaries for the E29-BOREAL TAIGA-SILTY FROZEN TERRACES series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

There are insufficient data to create the annual climate figure.

Geomorphic description summaries for the E29-BOREAL TAIGA-SILTY FROZEN TERRACES series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with E29-BOREAL TAIGA-SILTY FROZEN TERRACES, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

This figure is not available.

Block Diagrams

No block diagrams are available.

Map Units

Map units containing E29-BOREAL TAIGA-SILTY FROZEN TERRACES as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Interior Alaska Lowlands-Boreal Lowland-Flood Plains and TerracesE29FP9462443375374314dzak7221:250000
Interior Alaska Lowlands-Boreal Lowland-Flood Plains and TerracesE29FP92443439278314dzak7261:250000
Interior Alaska Lowlands-Boreal Lowland-Flood Plains and TerracesE29FP9783343352720314dzak7271:250000
Interior Alaska Lowlands-Boreal Lowland-Flood Plains and TerracesE29FP9969503316956314dzak7281:63360
Interior Alaska Lowlands-Boreal Lowland-Flood Plains and TerracesE29FP94492183357458314dzak7291:250000
Interior Alaska Lowlands-Boreal Lowland-Flood Plains and TerracesE29FP91858403375256314dzak7301:250000
Interior Alaska Lowlands-Boreal Lowland-Flood Plains and TerracesE29FP96231853375284314dzak7311:250000
Interior Alaska Lowlands-Boreal Lowland-Flood Plains and TerracesE29FP91201023375306314dzak7321:250000
Interior Alaska Lowlands-Boreal Lowland-Flood Plains and TerracesE29FP9493375414314dzak7401:250000
Interior Alaska Lowlands-Boreal Lowland-Flood Plains and TerracesE29FP9218693375427314dzak7411:250000
Interior Alaska Lowlands-Boreal Lowland-Flood Plains and TerracesE29FP9611713439074314dzak7651:250000
Interior Alaska Lowlands-Boreal Lowland Alluvial PlainsE29AP11054683354803314m7ak7681:250000
Interior Alaska Lowlands-Boreal Lowland Alluvial PlainsE29AP11430933375623314m7ak7891:250000
Interior Alaska Lowlands-Boreal Lowland-Flood Plains and TerracesE29FP91710313439344314dzak7931:250000

Map of Series Extent

Approximate geographic distribution of the E29-BOREAL TAIGA-SILTY FROZEN TERRACES soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .