Official Series Description


Lab Data Summary

Aggregate lab data for the DENHAWKEN soil series. This aggregation is based on all pedons with a current taxon name of DENHAWKEN, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to DENHAWKEN were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Click the image to view it full size.

Pedons used in the lab summary:

MLRALab IDPedon IDTaxonnameCINSSL / NASIS ReportsLink To SoilWeb GMap
83A93P059593TX177007Denhawken8Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties29.2091675,-97.6844406

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the DENHAWKEN soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the DENHAWKEN series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the DENHAWKEN series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the DENHAWKEN series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

Click the image to view it full size.

Competing Series

Soil series competing with DENHAWKEN share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the DENHAWKEN series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the DENHAWKEN series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with DENHAWKEN, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

Click a link below to display the diagram. Note that these diagrams may be from multiple survey areas.

  1. TX-2010-11-03-19 | Gonzales County - 2006

    Pattern of soils and underlying material in the Luling-Crockett-Benchley general soil map unit (Soil Survey of Gonzales County, Texas; 2006).

  2. TX-2012-03-21-25 | Lavaca County - December 1992

    Typical pattern of soils and parent material in the Straber-Tremona map unit (Soil Survey of Lavaca County, TX; 1992).

  3. TX-2012-03-21-26 | Lavaca County - December 1992

    Typical pattern of soils and parent material in the Denhawken-Elmendorf-Hallettsville map unit (Soil Survey of Lavaca County, TX; 1992).

Map Units

Map units containing DENHAWKEN as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Elmendorf-Denhawken complex, 1 to 4 percent slopes1135603362514d570tx01319771:24000
Denhawken-Elmendorf complex, 0 to 3 percent slopesDuB19529365055d7vztx12319731:20000
Elmendorf-Denhawken complex, 1 to 3 percent slopesEfB3249365708d8k1tx14919911:24000
Elmendorf-Denhawken complex, 1 to 3 percent slopesEdB11752365995d8v9tx16319851:24000
Elmendorf-Denhawken complex, 0 to 1 percent slopesEdA6730365994d8v8tx16319851:24000
Elmendorf-Denhawken complex, 1 to 3 percent slopesEnB272124368482msr0tx17520101:24000
Elmendorf-Denhawken complex, 1 to 3 percent slopesEkB13917366540d9dwtx17719971:24000
Elmendorf-Denhawken complex, 3 to 5 percent slopesEkC1910366541d9dxtx17719971:24000
Elmendorf-Denhawken complex, 1 to 3 percent slopesEdB2736368403dcbztx25519921:24000
Denhawken-Elmendorf complex, 1 to 3 percent slopesDeB51790369019dczvtx28519861:24000
Denhawken-Elmendorf complex, 0 to 2 percent slopesDxB1479373090dj75tx46919801:24000
Elmendorf-Denhawken complex, 1 to 4 percent slopesEdB38875373598djrktx49319721:24000
Elmendorf-Denhawken complex, 0 to 1 percent slopesEdA2603373597djrjtx49319721:24000

Map of Series Extent

Approximate geographic distribution of the DENHAWKEN soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .