Official Series Description


Lab Data Summary

Aggregate lab data for the BUNKER soil series. This aggregation is based on all pedons with a current taxon name of BUNKER, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to BUNKER were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

There are insufficient data to create the lab data summary figure.


Water Balance

Monthly water balance estimated using a leaky-bucket style model for the BUNKER soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the BUNKER series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the BUNKER series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the BUNKER series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Competing Series

Soil series competing with BUNKER share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the BUNKER series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the BUNKER series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with BUNKER, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

Click a link below to display the diagram. Note that these diagrams may be from multiple survey areas.

  1. WA-2012-05-11-27 | Grays Harbor County Area, Pacific County, and Wahkiakum County - July 1986

    Pattern of soils and parent material in general soil map unit 12 (Soil Survey of Grays Harbor County Area, Pacific County, and Wahkiakum County, Washington; July 1986).

  2. WA-2012-05-11-32 | Lewis County Area - May 1987

    Pattern of soils and parent material in the Katula-Bunker map unit (Soil Survey of Lewis County Area, Washington; May 1987).

Map Units

Map units containing BUNKER as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Katula-Bunker complex, 65 to 90 percent slopes991675729172fw5wa01519941:24000
Katula-Bunker complex, 30 to 65 percent slopes981285729092fvxwa01519941:24000
Bunker silt loam, 30 to 65 percent slopes151250721902f3qwa01519941:24000
Bunker silt loam, 5 to 30 percent slopes14940721782f3bwa01519941:24000
Bunker silt loam, 30 to 65 percent slopes1743403736092glhwa62719791:24000
Bunker silt loam, 5 to 30 percent slopes1624599735992gl5wa62719791:24000
Bunker silt loam, 65 to 90 percent slopes1812965736102gljwa62719791:24000
Katula-Bunker complex, 30 to 65 percent slopes1128736742572h8dwa64119801:24000
Bunker loam, 30 to 65 percent slopes308335744222hfqwa64119801:24000
Bunker loam, 8 to 30 percent slopes297818744202hfnwa64119801:24000
Katula-Bunker complex, 65 to 90 percent slopes1131501742582h8fwa64119801:24000
Katula-Bunker complex, 8 to 30 percent slopes111969742562h8cwa64119801:24000
Bunker gravelly silt loam, 30 to 65 percent slopes18592824547222ndblwa66719831:24000
Bunker-Boistfort complex, 40 to 65 percent slopes1949524547232ndbmwa66719831:24000
Bunker gravelly silt loam, 5 to 30 percent slopes1746724547212ndbkwa66719831:24000

Map of Series Extent

Approximate geographic distribution of the BUNKER soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .