Soil Data Explorer - BULKLEY

Official Series Description

Lab Data Summary

Aggregate lab data for the BULKLEY soil series. This aggregation is based on all pedons with a current taxon name of BULKLEY, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to BULKLEY were used in the calculation. Source: KSSL snapshot (updated 2020-03-18). Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Pedons used in the lab summary:

MLRA	Lab ID	Pedon ID	Taxonname	CI	NSSL / NASIS Reports	Link To SoilWeb GMap
34A	40A3270	S1975CO107004	BULKLEY	5	Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties	40.4571915,-107.2892609

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the BULKLEY soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the BULKLEY series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot (updated 2024-02-21), parsed OSD records (updated 2023-10-06) and snapshot of SC database (updated 2023-10-02).

Select annual climate data summaries for the BULKLEY series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2023-10-09).

Geomorphic description summaries for the BULKLEY series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records (updated 2023-10-04).

There are insufficient data to create the 3D flats position figure.

Competing Series

Soil series competing with BULKLEY share the same family level classification in Soil Taxonomy. Source: parsed OSD records (updated 2023-10-06) and snapshot of the SC database (updated 2023-10-02).

Select annual climate data summaries for the BULKLEY series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2023-10-09).

Geomorphic description summaries for the BULKLEY series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records (updated 2023-10-04).

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

Soil series sharing subgroup-level classification with BULKLEY, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database (updated 2023-10-02).

Block Diagrams

No block diagrams are available.

Map Units

Map units containing BULKLEY as a major component. Limited to 250 records.

Map Unit Name	Symbol	Map Unit Area (ac)	Map Unit Key	National Map Unit Symbol	Soil Survey Area	Publication Date	Map Scale
Bulkley silty clay, 12 to 25 percent slopes	10E	17426	506859	k0f9	co648		1:24000
Bulkley silty clay, 3 to 12 percent slopes	10C	11096	506858	k0f8	co648		1:24000
Bulkley silty clay loam, 25 to 40 percent slopes	10F	2421	506860	k0fb	co648		1:24000
Bulkley-Quilt complex, 12 to 45 percent slopes	24	80	3106837	jpcn	co648		1:24000
Bulkley clay loam, 25 to 65 percent slopes	19	2853	496594	jnr5	co679	1976	1:24000
Bulkley clay loam, 12 to 25 percent slopes	18	1187	496593	jnr4	co679	1976	1:24000
Bulkley channery silty clay loam, 5 to 30 percent slopes	13	7839	496961	jp40	co685	1979	1:24000
Bulkley-Abor clay loams, 5 to 30 percent slopes	14	3946	496962	jp41	co685	1979	1:24000
Bulkley silty clay, 3 to 12 percent slopes	22	13603	497191	jpcf	co686	1992	1:31680
Bulkley stony loam, 15 to 30 percent slopes, very stony	21	10538	497180	jpc2	co686	1992	1:31680
Bulkley silty clay, 12 to 25 percent slopes	23	10039	497197	jpcm	co686	1992	1:31680
Bulkley-Quilt complex, 12 to 45 percent slopes	24	5462	497198	jpcn	co686	1992	1:31680
Bulkley silty clay, 3 to 12 percent slopes	10C	177	3106873	k0f8	co686	1992	1:31680
Bulkley silty clay, 12 to 25 percent slopes	10E	97	3106876	k0f9	co686	1992	1:31680

Map of Series Extent

Approximate geographic distribution of the BULKLEY soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry (updated 2023-10-04).