Official Series Description


Lab Data Summary

Aggregate lab data for the BOYKIN soil series. This aggregation is based on all pedons with a current taxon name of BOYKIN, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to BOYKIN were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Click the image to view it full size.

Pedons used in the lab summary:

MLRALab IDPedon IDTaxonnameCINSSL / NASIS ReportsLink To SoilWeb GMap
133AS05AL-007-22005-AL007-Boykin-33EBoykin3Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties32.9061111,-87.1154444
133AS71AL-025-771AL025007-pgmBoykin3Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties31.6716667,-87.5972222
133AS96AL-023-296AL023002-pgmBoykin3Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties31.9508333,-88.2391667

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the BOYKIN soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the BOYKIN series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the BOYKIN series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the BOYKIN series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D mountains figure.

Click the image to view it full size.

Click the image to view it full size.

Competing Series

Soil series competing with BOYKIN share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the BOYKIN series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the BOYKIN series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with BOYKIN, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

Click a link below to display the diagram. Note that these diagrams may be from multiple survey areas.

  1. AL-2010-08-27-01 | Clarke County - 2006

    Generalized patterns of soils and geomorphology and landscape relationships in general soil map units 2—Iuka-Bibb-Harleston, 6—Lucedale-Bama-Smithdale, 8—Smithdale-Wadley-Boykin, 9—Smithdale-Flomaton-Wadley, 10—Prim-Suggsville-Brantley, and 11—Okeelala-Brantley-Smithdale. The area illustrated is along Bassett Creek in the northeastern part of Clarke County, Alabama (Soil Survey of Clarke County, Alabama; 2006) .

  2. AL-2012-04-24-02 | Clarke County - August 2006

    Generalized patterns of soils and geomorphology and landscape relationships in general soil map units 2—Iuka-Bibb-Harleston, 6—Lucedale-Bama-Smithdale, 8—Smithdale-Wadley-Boykin, 9—Smithdale-Flomaton-Wadley, 10—Prim-Suggsville-Brantley, and 11—Okeelala-Brantley-Smithdale. The area illustrated is along Bassett Creek in the northeastern part of Clarke County, Alabama (Soil Survey of Clarke County, Alabama; August 2006).

Map Units

Map units containing BOYKIN as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Smithdale-Maubila-Boykin complex, 15 to 35 percent slopesSmE2321331162132z471al00119721:20000
Boykin-Smithdale-Flomaton complex, gravelly, 10 to 35 percent slopesBsE2292031163972y6xjal00119721:20000
Smithdale-Maubila-Boykin complex, 8 to 15 percent slopesSmD892131162142z472al00119721:20000
Maubila-Smithdale-Boykin complex, 5 to 20 percent slopesMsD1527522329852dylsal00720071:24000
Wadley-Smithdale-Boykin complex, 5 to 20 percent slopesWdE564522471442ffbjal00720071:24000
Wadley-Boykin complex, 15 to 35 percent slopesWbF141522471412ffbfal00720071:24000
Boykin-Smithdale-Flomaton complex, gravelly, 10 to 35 percent slopesBsE3610431161972y6xjal02119671:20000
Boykin-Luverne-Smithdale complex, 15 to 35 percent slopesBnE2827003285652zx5cal02319981:24000
Boykin loamy fine sand, 1 to 5 percent slopesBkB1040328567c0wyal02319981:24000
Smithdale-Boykin complex, 2 to 5 percent slopesSbB438006000732s69nal02520041:24000
Smithdale-Boykin complex, 5 to 15 percent slopesSbD43720600072n4f5al02520041:24000
Wadley-Smithdale-Boykin complex, 5 to 20 percent slopesWbD6242725102sbjdal06520031:24000
Maubila-Smithdale-Boykin complex, 5 to 20 percent slopesMsD5513329767c24nal06520031:24000
Wadley-Boykin complex, 15 to 35 percent slopesWbF487725098sbj8al06520031:24000
Smithdale-Boykin-Luverne complex, 15 to 45 percent slopesSmF50930330596c30dal09119971:24000
Boykin-Wadley complex, 15 to 30 percent slopesBpE18950330562c2z9al09119971:24000
Boykin loamy fine sand, 0 to 5 percent slopesBoB4960330561c2z8al09119971:24000
Boykin-Luverne-Smithdale complex, 15 to 35 percent slopesBsF796226420632zx5cal12920131:24000
Wadley-Boykin-Smithdale complex, 15 to 35 percent slopesWbF429526421492rrx6al12920131:24000
Wadley-Boykin-Smithdale complex, 5 to 15 percent slopesWbD404326421482rrx5al12920131:24000
Boykin loamy sand, 1 to 5 percent slopesBpB91726420622rjr1al12920131:24000
Smithdale-Boykin complex, 2 to 5 percent slopesSmB125003316742s69nal13119971:24000
Boykin loamy fine sand, 5 to 8 percent slopesByD102217256931vxqjla01119931:24000
Boykin loamy fine sand, 1 to 5 percent slopesByC101717256921vxqhla01119931:24000
Boykin loamy fine sand, 5 to 12 percent slopesBPE315217245652ynxfla01319921:24000
Boykin loamy fine sand, 1 to 5 percent slopesBpC130617245742ynxdla01319921:24000
Boykin loamy fine sand, 1 to 5 percent slopesBo104417253262ynxdla11119921:24000
Boykin loamy fine sand, 1 to 3 percent slopesBoB791717255361vxkgla11519921:24000
Boykin loamy fine sand, 3 to 8 percent slopesBoD504917255371vxkhla11519921:24000
Boykin loamy fine sand, 1 to 5 percent slopesBy13885703372ynxdla11919891:24000
Boykin loamy fine sand, 5 to 20 percent slopesBP336117259492ynxgla12719911:24000
Boykin loamy fine sand, 1 to 5 percent slopesBo206917259482ynxdla12719911:24000
Wadley-Boykin-Smithdale complex, 5 to 15 percent slopesWbD507126422532rs3yms04120121:24000
Wadley-Boykin-Smithdale complex, 15 to 35 percent slopesWbF27326422542rs3zms04120121:24000
Smithdale-Boykin complex, 5 to 17 percent slopes367890332576c528ms05919971:24000
Wadley-Boykin-Smithdale complex, 5 to 15 percent slopesWsD620124034742lp0fms15320081:24000
Boykin-Luverne-Smithdale complex, 15 to 35 percent slopesBsE217024034932zx5cms15320081:24000
Boykin loamy fine sand, 1 to 3 percent slopesByB491369259dd7ltx29119861:24000
Boykin loamy sand, 1 to 5 percent slopesBoB793714793591lnd8tx45720071:24000
Doucette-Boykin association, undulatingDUB49694374417dklztx61119801:20000
Shankler-Boykin association, hillySBE38290374447dkmytx61119801:20000
Shankler-Boykin association, undulatingSBC4973374446dkmxtx61119801:20000
Boykin loamy fine sand, 1 to 5 percent slopesBoB16280576177mbkctx61719831:24000

Map of Series Extent

Approximate geographic distribution of the BOYKIN soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .