Official Series Description


Lab Data Summary

Aggregate lab data for the BONEEK soil series. This aggregation is based on all pedons with a current taxon name of BONEEK, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to BONEEK were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Click the image to view it full size.

Pedons used in the lab summary:

MLRALab IDPedon IDTaxonnameCINSSL / NASIS ReportsLink To SoilWeb GMap
60A40A2352S1970SD019008BONEEK8Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties44.663887,-104.015274

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the BONEEK soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the BONEEK series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the BONEEK series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the BONEEK series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Competing Series

Soil series competing with BONEEK share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the BONEEK series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the BONEEK series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Soil series sharing subgroup-level classification with BONEEK, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

Click a link below to display the diagram. Note that these diagrams may be from multiple survey areas.

  1. SD-2012-03-15-28 | Fall River County - April 1982

    Pattern of soils in the Mathias-Butche-Rockoa association (Soil Survey of Fall River County, SD; 1982).

Map Units

Map units containing BONEEK as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Boneek silt loam, 2 to 6 percent slopesP042B290225474432qt0psd01919701:24000
Butche, moist-Boneek complex, 6 to 25 percent slopesP050E223926688622qt1gsd01919701:24000
Boneek silt loam, 6 to 9 percent slopesP042C82125474452qt0qsd01919701:24000
Boneek loam, 6 to 10 percent slopesP040B7327680892rxrvsd01919701:24000
Boneek silt loam, 0 to 2 percent slopesP040C3527680902rxrwsd01919701:24000
Boneek loam, 2 to 6 percent slopesP040A427680882rxrtsd01919701:24000
Butche-Boneek, dry complex, 3 to 15 percent slopesP054D2841627331222qt27sd04719801:24000
Rockerville-Boneek, cool, complex, 6 to 15 percent slopesQ0657D394224346762mqgysd04719801:24000
Boneek silt loam, dry, 2 to 6 percent slopesP046B275827331202qt1fsd04719801:24000
Boneek silt loam, bedrock substratum, dry, 2 to 6 percent slopesP044B176527331212qt1ssd04719801:24000
Boneek silt loam, dry, 0 to 2 percent slopesP046A60527331192qt1dsd04719801:24000
Butche-Boneek complex, 3 to 15 percent slopesBvD31233336312zj59sd04719801:24000
Boneek silt loam, bedrock substratum, 2 to 6 percent slopesBpB219355094cxhnsd04719801:24000
Boneek silt loam, bedrock substratum, cool, 2 to 6 percent slopesQ0606B15924341972mpzhsd04719801:24000
Rockerville, warm-Boneek complex, 6 to 15 percent slopesP409D10727331452rxsrsd04719801:24000
Boneek silt loam, 6 to 9 percent slopesP042C343125474442qt0qsd08120071:24000
Boneek silt loam, 2 to 6 percent slopesP042B260925474422qt0psd08120071:24000
Boneek silt loam, 0 to 2 percent slopesP042A38227332382rxrwsd08120071:24000
Boneek silt loam, moist, 2 to 6 percent slopesQ0901B23023757282kr4dsd08120071:24000
Boneek silt loam, moist, 2 to 6 percent slopesQ0901B3825144622kr4dsd60019741:24000
Boneek silt loam, 6 to 9 percent slopesP042C827681122qt0qsd60019741:24000
Boneek silt loam, bedrock substratum, dry, 2 to 6 percent slopesP044B5827681292qt1ssd60720111:24000
Butche-Boneek, dry complex, 3 to 15 percent slopesP054D2627681322qt27sd60720111:24000
Boneek silt loam, dry, 2 to 6 percent slopesP046B527681272qt1fsd60720111:24000
Boneek loam, 2 to 6 percent slopesP040B3042727457162rxrtwy01119781:24000
Boneek loam, 6 to 10 percent slopesP040C513127457172rxrvwy01119781:24000
Boneek loam, 0 to 2 percent slopesP040A156527457152rxrswy01119781:24000
Boneek loam, 2 to 6 percent slopes291448349309cqh1wy01119781:24000
Boneek loam, cool, 2 to 6 percent slopesQ0801B113424391902mw5kwy01119781:24000
Boneek loam, cool, 6 to 10 percent slopesQ0801C31224391912mw5lwy01119781:24000
Boneek loam, 6 to 10 percent slopes30266349310cqh2wy01119781:24000
Boneek loam, 0 to 2 percent slopes28213349308cqh0wy01119781:24000
Boneek silt loam, 2 to 6 percent slopesP042B4927681652qt0pwy01119781:24000
Butche, moist-Boneek complex, 6 to 25 percent slopesP050E1527681612qt1gwy01119781:24000
Boneek loam, 2 to 6 percent slopesP040B127682142rxrtwy04519841:24000

Map of Series Extent

Approximate geographic distribution of the BONEEK soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .