Official Series Description


Lab Data Summary

Aggregate lab data for the BOGART soil series. This aggregation is based on all pedons with a current taxon name of BOGART, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to BOGART were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Click the image to view it full size.

Pedons used in the lab summary:

MLRALab IDPedon IDTaxonnameCINSSL / NASIS ReportsLink To SoilWeb GMap
n/aAB-0621955-OH007-062Bogart2Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Propertiesn/a
n/aST-0191966-OH153-019Bogart4Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Propertiesn/a
n/aST-0261967-OH153-026Bogart4Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Propertiesn/a
n/aWN-0771978-OH169-077Bogart5Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Propertiesn/a

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the BOGART soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the BOGART series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the BOGART series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the BOGART series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D mountains figure.

Click the image to view it full size.

Click the image to view it full size.

Competing Series

Soil series competing with BOGART share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the BOGART series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the BOGART series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Soil series sharing subgroup-level classification with BOGART, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

Click a link below to display the diagram. Note that these diagrams may be from multiple survey areas.

  1. OH-2012-02-16-17 | Columbiana County - February 1968

    A schematic drawing showing the relationship of soils on the Wisconsin glacial outwash plain (in the valley to the right) and on the Wisconsin till plain (Soil Survey of Columbiana County, Ohio; February 1968).

Map Units

Map units containing BOGART as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Bogart silt loam, 2 to 6 percent slopesBvB21182881359ntpoh00519761:15840
Bogart gravelly loam, 2 to 6 percent slopesBtB12332881349ntnoh00519761:15840
Bogart silt loam, 0 to 2 percent slopesBvA8442881309ntjoh00519761:15840
Bogart gravelly loam, 0 to 2 percent slopesBtA5632881339ntmoh00519761:15840
Bogart loam, 2 to 6 percent slopesBgB915926471qg8qoh00519761:15840
Bogart silt loam, 2 to 6 percent slopesBtB166412922661dcq0oh02920051:12000
Bogart silt loam, 6 to 12 percent slopesBtC18512922771dcqcoh02920051:12000
Bogart silt loam, 0 to 2 percent slopesBtA13812922651dcpzoh02920051:12000
Bogart loam, 6 to 12 percent slopes, erodedBsC28812922761dcqboh02920051:12000
Bogart loam, 2 to 6 percent slopesBtB7641685445ncxoh03319751:15840
Bogart loam, 0 to 2 percent slopesBtA4521685435ncwoh03319751:15840
Bogart loam, 2 to 6 percent slopesBgB8372872809my3oh03519781:15840
Bogart-Urban land complex, undulatingBhB4572872819my4oh03519781:15840
Bogart loam, 2 to 6 percent slopesBgB18492875279n62oh05519791:15840
Bogart silt loam, 2 to 6 percent slopesBtB5752868729mhyoh07519891:15840
Bogart silt loam, 0 to 2 percent slopesBtA2602868719mhxoh07519891:15840
Bogart gravelly loam, 2 to 6 percent slopesBoB516773361t9dmoh07519891:15840
Bogart silt loam, 2 to 6 percent slopesBoB7061613553nlg1oh08319831:15840
Bogart silt loam, 0 to 2 percent slopesBoA3399613552nlg0oh08319831:15840
Bogart gravelly loam, 2 to 6 percent slopesBgB115930551qgpwoh08319831:15840
Bogart loam, 0 to 2 percent slopesBtA11252877409ndyoh09319721:15840
Bogart loam, 2 to 6 percent slopesBtB9692877419ndzoh09319721:15840
Bogart sandy loam, 0 to 2 percent slopesBsA3472877399ndxoh09319721:15840
Bogart loam, 2 to 6 percent slopesBgB7554816723wdvxoh09919661:15840
Bogart loam, till substratum, 2 to 6 percent slopesBtB2676816725wdvzoh09919661:15840
Bogart loam, 6 to 12 percent slopesBgC1399816724wdvyoh09919661:15840
Bogart loam, till substratum, 6 to 12 percent slopes, moderately erodedBtC2514816726wdw0oh09919661:15840
Bogart silt loam, 2 to 6 percent slopesBrB1516521801sg74oh09919661:15840
Bogart silt loam, 6 to 12 percent slopesBrC616521811sg75oh09919661:15840
Bogart loam, 2 to 6 percent slopesBtB21472883109p0boh10319741:15840
Bogart loam, 0 to 2 percent slopesBtA6672883099p09oh10319741:15840
Bogart gravelly loam, 2 to 6 percent slopesBuB214125521jdw6oh10319741:15840
Bogart loam, 2 to 6 percent slopesBtB4815932451qgx0oh11719861:15840
Bogart silt loam, 0 to 2 percent slopesBvA2315932461qgx1oh11719861:15840
Bogart loam, 0 to 2 percent slopesBtA1115932441qgwzoh11719861:15840
Bogart silt loam, 2 to 6 percent slopesBgB36392884039p3boh13319731:15840
Bogart silt loam, 0 to 2 percent slopesBgA5902884029p39oh13319731:15840
Bogart-Haskins complex, 2 to 6 percent slopesBhB5762884049p3coh13319731:15840
Bogart loam, 2 to 6 percent slopesBaB8117177581vngkoh13319731:15840
Bogart loam, 0 to 2 percent slopesBaA217177571vngjoh13319731:15840
Bogart silt loam, 2 to 6 percent slopesBvB13471707295qndoh13919711:15840
Bogart silt loam, 0 to 2 percent slopesBvA8251707285qncoh13919711:15840
Bogart loam, 2 to 6 percent slopesBtB6731707275qnboh13919711:15840
Bogart loam, 0 to 2 percent slopesBtA2511707265qn9oh13919711:15840
Bogart loam, 0 to 2 percent slopesBtA915921801qfsnoh14719781:15840
Bogart silt loam, 2 to 6 percent slopesBoB17962879489nmnoh15119671:15840
Bogart silt loam, 0 to 2 percent slopesBoA6382879479nmmoh15119671:15840
Bogart-Urban land complexBu2962879509nmqoh15119671:15840
Bogart loam, 2 to 6 percent slopesBgB2292879469nmloh15119671:15840
Bogart silt loam, 6 to 12 percent slopesBoC2202879499nmpoh15119671:15840
Bogart loam, 0 to 2 percent slopesBgA1042879459nmkoh15119671:15840
Bogart loam, 2 to 6 percent slopesBgB1809825296wpsgoh15319691:20000
Bogart loam, 0 to 2 percent slopesBgA400825295wpsfoh15319691:20000
Bogart-Haskins loams, 2 to 6 percent slopesBhB320825297wpshoh15319691:20000
Bogart silt loam, 0 to 2 percent slopesBgA617218331vsq0oh15519861:15840
Bogart loam, 2 to 6 percent slopesBtB49582871669mtfoh16919811:15840
Bogart loam, 0 to 2 percent slopesBtA9862871659mtdoh16919811:15840
Bogart silt loam, 2 to 6 percent slopesBuB1822169622ddxxoh16919811:15840
Bogart loam, 0 to 2 percent slopesBtA615426191ns6xoh17519801:15840
Bogart loam, 2 to 6 percent slopesBtB415426201ns6yoh17519801:15840
Bogart loam, 2 to 6 percent slopesBgB829004811r3mkpa07319781:15840
Bogart loam, 6 to 12 percent slopesBgC129004821r3mppa07319781:15840

Map of Series Extent

Approximate geographic distribution of the BOGART soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .