Soil Data Explorer - BLANEY

Official Series Description

Lab Data Summary

Aggregate lab data for the BLANEY soil series. This aggregation is based on all pedons with a current taxon name of BLANEY, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to BLANEY were used in the calculation. Source: KSSL snapshot (updated 2020-03-13). Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

There are insufficient data to create the lab data summary figure.

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the BLANEY soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the BLANEY series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot (updated 2024-10-24), parsed OSD records (updated 2024-10-23) and snapshot of SC database (updated 2024-10-23).

Select annual climate data summaries for the BLANEY series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2024-10-23).

Geomorphic description summaries for the BLANEY series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records (updated 2024-10-23).

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D flats position figure.

Competing Series

Soil series competing with BLANEY share the same family level classification in Soil Taxonomy. Source: parsed OSD records (updated 2024-10-23) and snapshot of the SC database (updated 2024-10-23).

Select annual climate data summaries for the BLANEY series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data (updated 2024-10-23).

Geomorphic description summaries for the BLANEY series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records (updated 2024-10-23).

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with BLANEY, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database (updated 2024-10-23).

Block Diagrams

No block diagrams are available.

Map Units

Map units containing BLANEY as a major component. Limited to 250 records.

Map Unit Name	Symbol	Map Unit Area (ac)	Map Unit Key	National Map Unit Symbol	Soil Survey Area	Publication Date	Map Scale
Blaney loamy sand, 2 to 8 percent slopes	BaB	15200	811055	w6z2	nc051	1981	1:24000
Blaney loamy sand, 8 to 15 percent slopes	BaD	12875	811056	w6z3	nc051	1981	1:24000
Blaney-Urban land complex, 8 to 15 percent slopes	BdD	2207	811058	w6z5	nc051	1981	1:24000
Blaney-Urban land complex, 2 to 8 percent slopes	BdB	1978	811057	w6z4	nc051	1981	1:24000
Blaney loamy sand, 2 to 8 percent slopes	BnB	28932	113085	3snx	nc085	1984	1:24000
Blaney loamy sand, 8 to 15 percent slopes	BnD	7910	113086	3sny	nc085	1984	1:24000
Blaney loamy sand, 2 to 8 percent slopes	BaB	46330	811253	w75g	nc093	1981	1:24000
Blaney loamy sand, 8 to 15 percent slopes	BaD	18220	811254	w75h	nc093	1981	1:24000
Blaney loamy sand, 2 to 8 percent slopes	BaB	3744	113573	3t5n	nc105	1982	1:24000
Blaney loamy sand, 8 to 15 percent slopes	BaD	2273	113574	3t5p	nc105	1982	1:24000
Vaucluse and Blaney loamy sands, 6 to 10 percent slopes	VbC	1445	130336	4cmd	sc057	1967	1:20000
Blaney sand, 6 to 10 percent slopes	BlC	1119	130255	4cjs	sc057	1967	1:20000
Vaucluse and Blaney loamy sands, 10 to 15 percent slopes	VbD	820	130337	4cmf	sc057	1967	1:20000
Vaucluse and Blaney loamy sands, 2 to 6 percent slopes	VbB	651	130335	4cmc	sc057	1967	1:20000
Blaney sand, 2 to 10 percent slopes	BnC	34315	130491	4csd	sc063	1972	1:20000
Blaney-Vaucluse complex, 10 to 25 percent slopes	BoE	1829	130492	4csf	sc063	1972	1:20000

Map of Series Extent

Approximate geographic distribution of the BLANEY soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry (updated 2024-10-30).