Official Series Description


Lab Data Summary

Aggregate lab data for the SELLE soil series. This aggregation is based on all pedons with a current taxon name of SELLE, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to SELLE were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Click the image to view it full size.

Pedons used in the lab summary:

MLRALab IDPedon IDTaxonnameCINSSL / NASIS ReportsLink To SoilWeb GMap
4470C0008S1970ID017001Selle7Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties48.396946,-116.5294418
4470C0009S1970ID021001Selle5Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties48.5891685,-116.414444
4494P0240S1993ID021001Selle6Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties48.5081978,-116.4660645
4498P0031S1997ID021001Selle6Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties48.5088348,-116.4647217

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the SELLE soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the SELLE series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the SELLE series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the SELLE series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

Click the image to view it full size.

There are insufficient data to create the 3D flats position figure.

Competing Series

Soil series competing with SELLE share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the SELLE series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the SELLE series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

Click the image to view it full size.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with SELLE, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

No block diagrams are available.

Map Units

Map units containing SELLE as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Selle-Elmira complex, 0 to 20 percent slopes17582931528692x6t5id60120021:24000
Selle ashy fine sandy loam, 0 to 7 percent slopes17438221528685427id60120021:24000
Selle fine sandy loam, 0 to 8 percent slopes484695153005546nid60419811:24000
Selle-Elmira complex, 0 to 20 percent slopes49358230433522x6t5id60419811:24000
Selle-Mission complex, 0 to 12 percent slopes501876153008546rid60419811:24000
Selle fine sandy loam, 0 to 7 percent slopes1742051794642npcid60619761:24000
Selle-Elmira complex, 0 to 20 percent slopes54284529367635428id6701:24000
Selle fine sandy loam, 0 to 7 percent slopes2npc1829366582npcid6701:24000
Selle ashy fine sandy loam, 0 to 7 percent slopes5427429367395427id6701:24000
Selle fine sandy loam, 0 to 8 percent slopes546n42936682546nid6701:24000
Selle fine sandy loam, 0 to 3 percent slopesSb5011449054vscmt61719581:20000
Selle fine sandy loam, 3 to 8 percent slopesSc4821449064vsdmt61719581:20000
Selle ashy fine sandy loam, 0 to 7 percent slopes17413699230rgltmt63419881:24000

Map of Series Extent

Approximate geographic distribution of the SELLE soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .