Official Series Description


Lab Data Summary

Aggregate lab data for the MUSSELSHELL soil series. This aggregation is based on all pedons with a current taxon name of MUSSELSHELL, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to MUSSELSHELL were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Click the image to view it full size.

Pedons used in the lab summary:

MLRALab IDPedon IDTaxonnameCINSSL / NASIS ReportsLink To SoilWeb GMap
4440A3703S1970MT049001Musselshell6Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties46.6012878,-111.9808807
4640A3704S1970MT107002Musselshell6Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties46.4893608,-109.7169113
4640A3705S1970MT107003Musselshell6Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties46.5321388,-109.6410751

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the MUSSELSHELL soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the MUSSELSHELL series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the MUSSELSHELL series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the MUSSELSHELL series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

Click the image to view it full size.

There are insufficient data to create the 3D flats position figure.

Competing Series

Soil series competing with MUSSELSHELL share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the MUSSELSHELL series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

There are insufficient data to create the annual climate figure.

Geomorphic description summaries for the MUSSELSHELL series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with MUSSELSHELL, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

No block diagrams are available.

Map Units

Map units containing MUSSELSHELL as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Crago-Musselshell-Attewan complex, 1 to 4 percent slopes56A13763344599cgklmt06519961:24000
Crago-Musselshell complex, 1 to 4 percent slopes93A11557344649cglvmt06519961:24000
Crago-Musselshell cobbly loams, 1 to 4 percent slopes95A11471344653cglzmt06519961:24000
Crago-Musselshell-Attewan complex, 1 to 4 percent slopes, fan356A156717138181vfzrmt06519961:24000
Musselshell-Crago complex, 4 to 8 percent slopes97B1499344659ckn1mt06519961:24000
Crago-Musselshell-Attewan complex, 0 to 2 percent slopes282351344694ckp5mt06919891:24000
Crago-Musselshell complex, 0 to 4 percent slopes272001344693ckp4mt06919891:24000
Musselshell-Roto-Pensore complex, 4 to 15 percent slopes194D6421482304z7mmt60420011:24000
Musselshell-Amesha, bedrock substratum, complex, cool, 8 to 25 percent slopes84111185964320f3hmt60520071:24000
Musselshell-Crago channery loams, 15 to 35 percent slopesMwE407331475254yhwmt60919711:24000
Musselshell-Crago cobbly loams, 8 to 20 percent slopesMxE155911475264yhxmt60919711:24000
Musselshell-Thess cobbly loams, 3 to 8 percent slopesMyC65321475274yhymt60919711:24000
Musselshell gravelly loam, 2 to 5 percent slopesMvB64791475234yhtmt60919711:24000
Musselshell gravelly loam, 5 to 9 percent slopesMvC34031475244yhvmt60919711:24000
Crago, stony-Musselshell complex, 8 to 15 percent slopes8D21321476464ymsmt60919711:24000
Mussel-Musselshell complex, 2 to 5 percent slopesMuB8001475214yhrmt60919711:24000
Mussel-Musselshell complex, 5 to 9 percent slopesMuC6801475224yhsmt60919711:24000
Musselshell-Pensore, stony complex, 15 to 35 percent slopes425E61476684ynhmt60919711:24000
Crago-Musselshell complex, 0 to 4 percent slopes734B5007155696570gmt62219971:24000
Musselshell-Pensore, stony complex, 15 to 35 percent slopes425E176315546856s3mt62219971:24000
Crago-Musselshell complex, 4 to 8 percent slopes734C1674155697570hmt62219971:24000
Crago-Musselshell complex, 8 to 15 percent slopes734D1515155698570jmt62219971:24000
Musselshell loam, 0 to 4 percent slopes25B113215535556ngmt62219971:24000
Musselshell cobbly loam, 2 to 8 percent slopes225C85715532456mgmt62219971:24000
Musselshell cobbly loam, 8 to 15 percent slopes225D67515532556mhmt62219971:24000
Musselshell very cobbly loam, 15 to 35 percent slopes, very stony325E13915539556prmt62219971:24000
Crago-Musselshell complex, 0 to 4 percent slopes, fan493B32675190287321w30mt62420211:24000
Musselshell-Crago gravelly loams, 0 to 2 percent slopes497A8017190378121x19mt62420211:24000
Musselshell-Crago gravelly loams, 4 to 8 percent slopes498C5962194909523f61mt62420211:24000
Musselshell-Crago gravelly loams, 2 to 4 percent slopes497B3645190379621x1smt62420211:24000
Crago-Musselshell-Attewan complex, 0 to 2 percent slopes496A1789190377921x17mt62420211:24000
Crago-Musselshell complex, 0 to 4 percent slopes893B976194909123f5xmt62420211:24000
Crago-Musselshell cobbly loams, 1 to 4 percent slopes, fan395A37625232361vfzwmt62420211:24000
Amesha-Musselshell complex, 2 to 4 percent slopes139B4325232291ncg1mt62420211:24000
Crago-Musselshell-Attewan complex, 1 to 4 percent slopes, fan356A2331768621vfzrmt62420211:24000
Crago-Musselshell complex, 8 to 35 percent slopes184E2225232311nczymt62420211:24000
Crago-Musselshell cobbly loams, 1 to 4 percent slopes95A132513992cglzmt62420211:24000
Musselshell-Crago complex, 2 to 4 percent slopes437B125232421nczpmt62420211:24000
Musselshell-Crago gravelly loams, 2 to 8 percent slopes391C1149151059525wmt62719981:24000
Musselshell-Crago cobbly loams, 1 to 4 percent slopes394B857151062525zmt62719981:24000
Crago-Musselshell gravelly loams, 4 to 35 percent slopes3433E8915166052t8mt62719981:24000
Musselshell-Crago complex, 2 to 8 percent slopes3137B5915165652t4mt62719981:24000
Musselshell-Crago complex, 2 to 8 percent slopes137B197841476994yphmt63019911:24000
Crago-Musselshell gravelly loams, 4 to 35 percent slopes433E126501478164yt8mt63019911:24000
Musselshell-Crago-Pensore complex, 4 to 25 percent slopes341D40211477914ysgmt63019911:24000
Sappington-Musselshell gravelly loams, 2 to 8 percent slopes533B21971478444yv5mt63019911:24000
Rootel-Musselshell loams, 2 to 8 percent slopes41C9121478144yt6mt63019911:24000
Weingart-Musselshell complex, 2 to 8 percent slopes714B4101478974ywwmt63019911:24000
Musselshell-Sappington loams, 2 to 8 percent slopes437C3191478174yt9mt63019911:24000
Musselshell-Amesha, bedrock substratum, complex, cool, 8 to 25 percent slopes84350531465124xg6mt63619831:24000
Musselshell loam, cool, 2 to 8 percent slopes82333691465104xg4mt63619831:24000
Musselshell-Crago complex, cool, 2 to 8 percent slopes85278221465134xg7mt63619831:24000
Amesha, bedrock substratum-Musselshell complex, cool, 2 to 8 percent slopes531231464744xdzmt63619831:24000
Musselshell gravelly loam, cool, 0 to 2 percent slopes8325961465114xg5mt63619831:24000
Musselshell-Pensore, stony complex, 15 to 35 percent slopes190171465424xh5mt63619831:24000
Musselshell cobbly loam, cool, 2 to 8 percent slopes127C50101479824yzmmt63720141:24000
Crago-Musselshell complex, cool, 8 to 35 percent slopes124E46241479804yzkmt63720141:24000
Musselshell-Crago complex, cool, 2 to 4 percent slopes427B39791480284z13mt63720141:24000
Musselshell loam, cool, 0 to 4 percent slopes327B24191480204z0vmt63720141:24000
Crago-Musselshell complex, 1 to 4 percent slopes24B23491480054z0cmt63720141:24000
Musselshell-Crago complex, 0 to 2 percent slopes127A16681479814yzlmt63720141:24000
Crago-Musselshell complex, 8 to 35 percent slopes184E128615308711nczymt63720141:24000
Amesha-Musselshell complex, cool, 2 to 4 percent slopes129B12351479834yznmt63720141:24000
Musselshell cobbly loam, 2 to 8 percent slopes137C78015303331ncflmt63720141:24000
Crago-Musselshell complex, cool, 1 to 4 percent slopes84B75015304081ncj0mt63720141:24000
Amesha-Musselshell complex, 2 to 4 percent slopes139B65415303471ncg1mt63720141:24000
Musselshell-Crago complex, 2 to 4 percent slopes437B55515308631nczpmt63720141:24000
Musselshell loam, 2 to 4 percent slopes337B4215308621ncznmt63720141:24000
Crago-Musselshell cobbly loams, 1 to 4 percent slopes, fan395A2521617115371vfzwmt66620081:24000
Crago-Musselshell complex, 1 to 4 percent slopes, fan393A2318217115351vfztmt66620081:24000
Crago-Musselshell-Attewan complex, 1 to 4 percent slopes, fan356A1584817115331vfzrmt66620081:24000
Crago-Musselshell-Attewan complex, 1 to 4 percent slopes56A3652341700cgklmt66620081:24000
Crago-Musselshell cobbly loams, 1 to 4 percent slopes95A3140341743cglzmt66620081:24000
Crago-Musselshell complex, 1 to 4 percent slopes93A1155341739cglvmt66620081:24000

Map of Series Extent

Approximate geographic distribution of the MUSSELSHELL soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .