Official Series Description


Lab Data Summary

Aggregate lab data for the ARLINGTON soil series. This aggregation is based on all pedons with a current taxon name of ARLINGTON, and applied along 1-cm thick depth slices. Solid lines are the slice-wise median, bounded on either side by the interval defined by the slice-wise 5th and 95th percentiles. The median is the value that splits the data in half. Five percent of the data are less than the 5th percentile, and five percent of the data are greater than the 95th percentile. Values along the right hand side y-axis describe the proportion of pedon data that contribute to aggregate values at this depth. For example, a value of "90%" at 25cm means that 90% of the pedons correlated to ARLINGTON were used in the calculation. Source: KSSL snapshot . Methods used to assemble the KSSL snapshot used by SoilWeb / SDE

Click the image to view it full size.

Pedons used in the lab summary:

MLRALab IDPedon IDTaxonnameCINSSL / NASIS ReportsLink To SoilWeb GMap
1940A2850S1957CA065010ARLINGTON5Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties33.8013878,-117.1916656
1940A2985S1966CA073003Arlington5Primary | Supplementary | Taxonomy | Pedon | Water Retention | Correlation | Andic Soil Properties32.8341675,-117.1377792

Water Balance

Monthly water balance estimated using a leaky-bucket style model for the ARLINGTON soil series. Monthly precipitation (PPT) and potential evapotranspiration (PET) have been estimated from the 50th percentile of gridded values (PRISM 1981-2010) overlapping with the extent of SSURGO map units containing each series as a major component. Monthly PET values were estimated using the method of Thornthwaite (1948). These (and other) climatic parameters are calculated with each SSURGO refresh and provided by the fetchOSD function of the soilDB package. Representative water storage values (“AWC” in the figures) were derived from SSURGO by taking the 50th percentile of profile-total water storage (sum[awc_r * horizon thickness]) for each soil series. Note that this representation of “water storage” is based on the average ability of most plants to extract soil water between 15 bar (“permanent wilting point”) and 1/3 bar (“field capacity”) matric potential. Soil moisture state can be roughly interpreted as “dry” when storage is depleted, “moist” when storage is between 0mm and AWC, and “wet” when there is a surplus. Clearly there are a lot of assumptions baked into this kind of monthly water balance. This is still a work in progress.

Click the image to view it full size.



Click the image to view it full size.

Sibling Summary

Siblings are those soil series that occur together in map units, in this case with the ARLINGTON series. Sketches are arranged according to their subgroup-level taxonomic structure. Source: SSURGO snapshot , parsed OSD records and snapshot of SC database .

Click the image to view it full size.

Select annual climate data summaries for the ARLINGTON series and siblings. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

Click the image to view it full size.

Geomorphic description summaries for the ARLINGTON series and siblings. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. Proportions can be interpreted as an aggregate representation of geomorphic membership. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Small Shannon entropy values suggest relatively consistent geomorphic association, while larger values suggest lack thereof. Source: SSURGO component records .

Click the image to view it full size.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

Click the image to view it full size.

There are insufficient data to create the 3D flats position figure.

Competing Series

Soil series competing with ARLINGTON share the same family level classification in Soil Taxonomy. Source: parsed OSD records and snapshot of the SC database .

Click the image to view it full size.

Select annual climate data summaries for the ARLINGTON series and competing. Series are sorted according to hierarchical clustering of median values. Source: SSURGO map unit geometry and 1981-2010, 800m PRISM data .

There are insufficient data to create the annual climate figure.

Geomorphic description summaries for the ARLINGTON series and competing. Series are sorted according to hierarchical clustering of proportions and relative hydrologic position within an idealized landform (e.g. top to bottom). Proportions can be interpreted as an aggregate representation of geomorphic membership. Most soil series (SSURGO components) are associated with a hillslope position and one or more landform-specific positions: hills, mountain slopes, terraces, and/or flats. The values printed to the left (number of component records) and right (Shannon entropy) of stacked bars can be used to judge the reliability of trends. Shannon entropy values close to 0 represent soil series with relatively consistent geomorphic association, while values close to 1 suggest lack thereof. Source: SSURGO component records .

There are insufficient data to create the 2D hillslope position figure.

There are insufficient data to create the 3D hills figure.

There are insufficient data to create the 3D mountains figure.

There are insufficient data to create the 3D terrace figure.

There are insufficient data to create the 3D flats position figure.

Soil series sharing subgroup-level classification with ARLINGTON, arranged according to family differentiae. Hovering over a series name will print full classification and a small sketch from the OSD. Source: snapshot of SC database .

Block Diagrams

No block diagrams are available.

Map Units

Map units containing ARLINGTON as a major component. Limited to 250 records.

Map Unit Name Symbol Map Unit Area (ac) Map Unit Key National Map Unit Symbol Soil Survey Area Publication Date Map Scale
Arlington coarse sandy loam, 2 to 9 percent slopesAvC929456729hb86ca63819671:24000
Arlington fine sandy loam, deep, 2 to 8 percent slopesAoC5595458149hcr0ca67919671:15840
Arlington and Greenfield fine sandy loams, 8 to 15 percent slopes, erodedAtD24531458155hcr6ca67919671:15840
Arlington loam, 2 to 5 percent slopesApB3078458151hcr2ca67919671:15840
Arlington and Greenfield fine sandy loams, 2 to 8 percent slopes , erodedAtC21957458154hcr5ca67919671:15840
Arlington loam, deep, 0 to 5 percent slopesArB1597458152hcr3ca67919671:15840
Arlington fine sandy loam, 2 to 8 percent slopesAnC1053458146hcqxca67919671:15840
Arlington loam, deep, 5 to 15 percent slopesArD913458153hcr4ca67919671:15840
Arlington fine sandy loam, deep, 0 to 2 percent slopesAoA795458148hcqzca67919671:15840
Arlington and Greenfield fine sandy loams, 15 to 35 percent slopes, severely erodedAtF3527458156hcr7ca67919671:15840
Arlington fine sandy loam, deep, 8 to 15 percent slopesAoD519458150hcr1ca67919671:15840
Arlington fine sandy loam, 8 to 15 percent slopesAnD499458147hcqyca67919671:15840

Map of Series Extent

Approximate geographic distribution of the ARLINGTON soil series. To learn more about how this distribution was mapped, or to compare this soil series extent to others, use the Series Extent Explorer (SEE) application. Source: generalization of SSURGO geometry .